Titanium Grade 5 Round Bar: Properties, Specifications and Industrial Buying Guide

Titanium Grade 5 Round Bar

Titanium Grade 5 round bar is a high-strength titanium alloy used in applications where a combination of low weight, mechanical strength and corrosion resistance is important. Also identified as Ti-6Al-4V, Ti-6-4, Ti64 and UNS R56400, this alloy is widely specified for demanding aerospace, marine, oil and gas, automotive and industrial engineering components.

For buyers, selecting the correct Titanium Grade 5 round bar involves more than confirming the grade name. The product specification, diameter, supply condition, dimensional tolerance, test requirements and material documentation must all match the component’s engineering requirements.

Manan Steel & Metals supplies specialty steel and alloy materials, including titanium grades. Buyers can contact the team with their required grade, dimensions and quantity for an enquiry.

What Is Titanium Grade 5?

Titanium Grade 5 is an alpha-beta titanium alloy containing aluminium and vanadium as its principal alloying elements. Its recognised designation is Ti-6Al-4V, referring to approximately 6% aluminium and 4% vanadium, with titanium forming the balance.

The alloy is valued for its high strength-to-weight ratio and corrosion resistance in many environments. Compared with commercially pure titanium grades, Grade 5 offers higher mechanical strength, making it suitable for components exposed to demanding loads.

Common material designations include:

  • Titanium Grade 5
  • Ti-6Al-4V
  • Ti-6-4 or Ti64
  • UNS R56400
  • Werkstoff 3.7164 / 3.7165, depending on the applicable product specification

These designations are useful when searching for material, but the buyer should always confirm the governing standard and product form before placing an order.

Titanium Grade 5 Round Bar: Chemical Composition

The chemical composition of Titanium Grade 5 is controlled by the applicable material specification. Aluminium and vanadium are the principal alloying elements, while limits on oxygen, nitrogen, carbon, hydrogen and iron help control material quality and performance.

Typical composition limits commonly associated with Ti-6Al-4V include:

ElementTypical specification range or limit
Aluminium (Al)5.50–6.75%
Vanadium (V)3.50–4.50%
Iron (Fe)Maximum depends on specification
Oxygen (O)Maximum 0.20%
Carbon (C)Maximum 0.08%
Nitrogen (N)Maximum 0.05%
Hydrogen (H)Maximum depends on specification
Titanium (Ti)Balance

These values are a general reference, not a substitute for the governing standard. The buyer should check the exact chemistry limits and the material test certificate for the ordered product.

Important Properties of Titanium Grade 5 Round Bar

Titanium Grade 5 is selected when a component needs substantial mechanical strength without the weight associated with many conventional engineering metals.

1. High strength-to-weight ratio

One of the main reasons engineers specify Ti-6Al-4V is its ability to provide high strength at a relatively low density. This makes it useful in weight-sensitive structural and rotating components.

2. Corrosion resistance

Titanium Grade 5 forms a protective oxide film on its surface. This contributes to its corrosion resistance in many environments, although performance must be assessed against the actual chemicals, temperature, concentration and service conditions.

3. Mechanical strength

Grade 5 offers significantly higher strength than commercially pure titanium grades. Actual tensile strength, yield strength and elongation depend on the product specification, dimensions and supply condition.

4. Heat-treatment capability

As an alpha-beta alloy, Ti-6Al-4V can be supplied in different conditions, including annealed and solution-treated-and-aged conditions where permitted by the relevant specification. Heat treatment must be selected according to the component’s engineering requirements.

5. Machining considerations

Titanium Grade 5 requires appropriate tooling, cutting conditions and heat management during machining. Its low thermal conductivity can cause heat to concentrate near the cutting zone, making machining practice important.

Titanium Grade 5 Round Bar Standards and Specifications

The applicable standard depends on the product form and required condition. Buyers should avoid assuming that every titanium specification covers every product form.

Commonly referenced specifications include:

StandardTypical product coverage
ASTM B348Titanium and titanium alloy bars and billets
ASTM B265Titanium and titanium alloy sheet, strip and plate
AMS 4928Titanium alloy bars, forgings and forging stock in the specified condition
AMS 4965Titanium alloy bars and forgings in solution-treated-and-aged condition, subject to specification scope

The latest applicable revision and exact grade requirements should be confirmed before procurement. For aerospace or other controlled applications, the purchaser should state the required specification, condition and acceptance criteria clearly.

For technical reference, consult the ATI Ti-6Al-4V Grade 5 technical data sheet and the Titanium Industries AMS 4928 specification guide.

Industrial Applications of Titanium Grade 5 Round Bar

Titanium Grade 5 round bars are used to manufacture components where strength, weight reduction and resistance to demanding operating environments are important.

Aerospace components

The alloy is used in selected aircraft structural parts, engine components, fasteners and other weight-sensitive engineering applications. Material selection must follow the relevant aerospace specification and approval requirements.

Marine and offshore equipment

Its corrosion resistance and mechanical strength make Grade 5 relevant to selected marine and offshore components. Suitability depends on the actual seawater exposure, crevice conditions, loading and design requirements.

Oil and gas equipment

Titanium alloys may be specified for selected components in demanding oil and gas environments. Buyers should provide the service conditions and any applicable project or industry requirements when requesting material.

Automotive and motorsport engineering

High-performance engineering applications can use Ti-6Al-4V where reducing component weight while retaining strength is a priority.

Industrial machinery and precision components

Grade 5 round bars can be machined into shafts, fittings, fasteners and other precision-engineered components, subject to the design and service requirements.

How to Select the Right Titanium Grade 5 Round Bar

Before purchasing Titanium Grade 5 round bar, check the following details:

  1. Grade designation: Confirm Titanium Grade 5 / Ti-6Al-4V / UNS R56400.
  2. Product standard: Specify the required ASTM or AMS standard.
  3. Diameter: State the exact required diameter and acceptable tolerance.
  4. Length: Confirm standard or cut-to-length requirements.
  5. Supply condition: Specify annealed or another required condition.
  6. Quantity: Mention the required quantity and unit of measurement.
  7. Testing and documentation: State whether chemical analysis, mechanical testing, inspection or a particular certificate is required.
  8. Application: Share the intended use and operating conditions where relevant.

A complete enquiry helps the supplier assess the requirement accurately and reduces the risk of receiving a quotation for a different product condition or specification.

Material Test Certificate and Inspection Requirements

For industrial procurement, material traceability is an important part of the buying process. Buyers should specify the documentation required before confirming the order.

Depending on the application and purchase specification, the documentation may include:

  • Material grade and applicable standard
  • Heat or batch number
  • Chemical composition
  • Mechanical test results, where required
  • Product dimensions and condition
  • Inspection or testing documentation
  • Certificate type and standard of issue, as specified by the purchaser

Do not assume that every order automatically includes the same certificate or inspection scope. Confirm the documentation requirements with the supplier before placing the purchase order.

Why Choose the Right Titanium Grade 5 Supplier?

A suitable supplier should understand the difference between titanium grades, product forms and material specifications. A clear enquiry process helps buyers confirm whether the offered material matches the required engineering specification.

When sourcing Titanium Grade 5 round bars, buyers should look for:

  • Correct grade and product designation
  • Compliance with the specified product standard
  • Confirmation of diameter, length and tolerance
  • Clear information about supply condition
  • Traceability and documentation as required
  • Transparent quotation and delivery terms

Manan Steel & Metals deals in specialty metals and alloy materials. Buyers looking for Titanium Grade 5 round bars can share their requirements for a quotation and availability confirmation.

Enquire About Titanium Grade 5 Round Bars

Looking for Titanium Grade 5 round bars for aerospace, marine, offshore, automotive or industrial engineering applications?

Contact Manan Steel & Metals with your required diameter, length, quantity and material specification.

Email: sales@manansteel.com
Phone: +91 98198 76962
Website: https://manansteel.com/
Enquiry: Contact Manan Steel & Metals

Share your material requirement to discuss the suitable grade, specification and supply options.


SEO Details

SEO Title: Titanium Grade 5 Round Bar | Ti-6Al-4V Supplier

Focus Keyword: Titanium Grade 5 round bar

Secondary Keywords:

  • Titanium Grade 5 supplier
  • Ti-6Al-4V round bar
  • Titanium 6Al-4V bar
  • UNS R56400 titanium
  • Grade 5 titanium rod
  • Titanium alloy round bar
  • ASTM B348 Grade 5
  • AMS 4928 titanium bar
  • Titanium Grade 5 properties
  • Titanium Grade 5 specifications
  • Titanium Grade 5 applications
  • Titanium round bar supplier India
  • Ti64 round bar
  • 3.7164 titanium
  • 3.7165 titanium

URL Slug: titanium-grade-5-round-bar-properties-specifications-guide

Meta Description: Looking for Titanium Grade 5 round bar? Explore Ti-6Al-4V properties, UNS R56400, ASTM B348, AMS 4928 and industrial applications.

Featured Image Filename: titanium-grade-5-ti-6al-4v-round-bar.jpg

Image Alt Text: Titanium Grade 5 Ti-6Al-4V round bar UNS R56400

Image Caption: Titanium Grade 5 (Ti-6Al-4V) round bar for industrial and engineering applications.

Internal Links:

External Authority Links:

Publishing Checklist

  • Use the SEO title and focus keyword exactly as listed.
  • Keep the article title as the only H1 heading.
  • Add the featured image with the supplied filename and alt text.
  • Add the internal links and retain the external links as normal clickable links.
  • Confirm the article slug is not already in use.
  • Check the final page on mobile and desktop.
  • Review the Rank Math analysis after publishing and correct any warnings.