Titanium Grade 2 Price in India – Industrial Buying Guide for UNS R50400
SEO Title: Titanium Grade 2 Price in India – UNS R50400 Buying Guide
Primary Focus Keyword: Titanium Grade 2 Price in India
Secondary Keywords: Titanium Grade 2 price per kg, UNS R50400 price, Grade 2 titanium cost, commercially pure titanium price, Titanium Grade 2 round bar price, Titanium Grade 2 sheet price, Titanium Grade 2 pipe price, 3.7035 titanium supplier India, Titanium Grade 2 material supplier
URL Slug: titanium-grade-2-price-india
Meta Description: Looking for Titanium Grade 2 price in India? Learn what affects UNS R50400 material costs, specifications, documentation and industrial quotations.
Table of Contents
- Introduction to Titanium Grade 2 Price in India
- What Is Titanium Grade 2?
- Factors That Affect Titanium Grade 2 Price
- Price Differences Between Titanium Grade 2 Product Forms
- How to Request an Accurate Titanium Grade 2 Quotation
- Documents to Check Before Purchasing
- Common Buying Mistakes to Avoid
- Frequently Asked Questions
- Request a Titanium Grade 2 Quotation from Manan Steel & Metals
1. Introduction to Titanium Grade 2 Price in India
The Titanium Grade 2 price in India depends on several factors, including product form, dimensions, quantity, material specification, manufacturing route, documentation and delivery requirements. There is no single price that applies to every Titanium Grade 2 product.
Titanium Grade 2 is commercially pure titanium identified by UNS R50400 and commonly associated with material number 3.7035. It is considered for industrial applications where corrosion resistance, formability and moderate mechanical strength are important.
Buyers sourcing titanium round bars, sheets, plates, pipes or tubes should compare quotations using the same material grade, product dimensions and applicable standard. Comparing only the quoted price per kilogram may overlook important differences in specification, tolerances, documentation and delivery terms.
Manan Steel & Metals welcomes industrial material enquiries. For a more relevant quotation, buyers should provide their complete technical and quantity requirements.
2. What Is Titanium Grade 2?
Titanium Grade 2 is a commercially pure titanium grade widely used in selected industrial environments. It combines useful corrosion resistance with good formability and a relatively low density of approximately 4.51 g/cm³.
Key identification details include:
| Parameter | Details |
|---|---|
| Material | Titanium Grade 2 |
| UNS designation | R50400 |
| Material number | 3.7035 |
| Material category | Commercially pure titanium |
| Density | Approximately 4.51 g/cm³ |
| Common product forms | Bar, sheet, plate, pipe and tube, subject to supplier range |
| Material selection | Must suit the application and applicable specification |
Titanium Grade 2 is not suitable for every corrosive environment. Buyers should confirm chemical compatibility, temperature, pressure and mechanical requirements with their engineering team before selecting the material.
For background on the material, see our related articles on Titanium Grade 2 properties and Titanium Grade 2 industrial applications.
3. Factors That Affect Titanium Grade 2 Price
Several variables can influence the price quoted for UNS R50400 material.
3.1 Product form
The cost of titanium round bar may differ from that of sheet, plate, pipe or tube. Manufacturing processes, dimensions, tolerances and finishing requirements vary by product form.
When requesting a quote, identify the exact product rather than asking only for a general Titanium Grade 2 rate.
3.2 Dimensions and thickness
Diameter, wall thickness, sheet thickness, width and length can affect material consumption, processing requirements and available supply options.
Non-standard dimensions or tight tolerances may require a more specific sourcing or manufacturing route.
3.3 Required specification and material condition
The applicable ASTM or project specification can influence the requirements that a product must meet.
Examples include:
- ASTM B348/B348M for titanium and titanium alloy bars and billets.
- ASTM B265 for titanium and titanium alloy strip, sheet and plate.
- ASTM B338 for titanium and titanium alloy tubes for condensers and heat exchangers.
- ASTM B861 for seamless titanium and titanium alloy pipe.
- ASTM B862 for welded titanium and titanium alloy pipe.
The applicable standard must be checked against the actual product form, grade and project specification.
3.4 Order quantity
Quantity can affect sourcing, processing, packing and freight costs. A requirement for a few cut lengths may be quoted differently from a larger order.
Provide the required quantity and unit clearly, such as kilograms, pieces, lengths or sheets.
3.5 Material testing and documentation
Some industrial buyers require material test certificates, traceability, inspection reports or additional testing. These requirements should be identified before a quotation is finalised because they can affect cost and lead time.
3.6 Market conditions and supply availability
Titanium prices may change with raw-material costs, supplier availability, production lead times, currency movements and logistics. A quotation should therefore be treated as time-specific and checked for its validity period.
3.7 Packing, freight and taxes
The delivered cost may include packing, transport, insurance where applicable and taxes. Confirm whether the quotation is ex-works, delivered or based on another agreed commercial term.
Important: The lowest quoted price is not necessarily the lowest total procurement cost. Compare material compliance, documentation, dimensions, delivery terms and total landed cost.
4. Price Differences Between Titanium Grade 2 Product Forms
The following table explains why quotations may vary. It does not represent live market prices.
| Product form | Details that influence the quotation |
|---|---|
| Titanium Grade 2 round bar | Diameter, length, tolerance, quantity and applicable bar specification |
| Titanium Grade 2 sheet | Thickness, width, length, surface condition and standard |
| Titanium Grade 2 plate | Thickness, dimensions, quantity and inspection requirements |
| Titanium Grade 2 pipe | Outside diameter, wall thickness, length, seamless or welded construction and standard |
| Titanium Grade 2 tube | Outside diameter, wall thickness, length and intended service |
| Custom-cut material | Original dimensions, cutting allowance, finished size and processing requirements |
Before comparing supplier quotations, ensure that the material grade, specification and dimensions match. A quotation for one product form or standard may not be comparable with another.
5. How to Request an Accurate Titanium Grade 2 Quotation
To obtain a useful quotation, prepare the following information.
| Required detail | Example of what to provide |
|---|---|
| Material grade | Titanium Grade 2 / UNS R50400 |
| Product form | Round bar, sheet, plate, pipe or tube |
| Dimensions | Diameter, thickness, width, wall thickness or length |
| Quantity | Required kilograms, pieces or lengths |
| Applicable standard | Relevant ASTM or project specification |
| Documentation | Material test certificate or other required records |
| Application | Equipment type and operating environment |
| Delivery destination | City and delivery address or agreed delivery point |
| Commercial terms | Required delivery timeline and any specific terms |
If you are unsure which specification applies, provide your drawing, bill of materials or purchase specification for review.
Example quotation enquiry
Subject: Enquiry for Titanium Grade 2 – UNS R50400
Dear Sales Team,
Please provide your quotation for the following Titanium Grade 2 requirement:
- Material grade: Titanium Grade 2 / UNS R50400
- Product form: [Round bar / Sheet / Plate / Pipe / Tube]
- Dimensions: [Insert dimensions]
- Quantity: [Insert quantity and unit]
- Applicable standard: [Insert standard]
- Material documentation: [Insert requirements]
- Delivery location: [Insert destination]
Please confirm the quoted rate, availability, delivery lead time, applicable taxes, packing and freight charges, documentation and quotation validity.
Regards,
[Buyer Name]
[Company Name]
[Contact Details]
6. Documents to Check Before Purchasing
Before placing an order, review the documents relevant to your project and purchase specification.
- Material Test Certificate (MTC): Check that the reported chemistry and mechanical properties meet the applicable requirements.
- Grade and heat identification: Confirm traceability where required.
- Dimensional inspection: Verify that dimensions and tolerances match the purchase order.
- Applicable material standard: Confirm that the specified standard covers the product form and grade.
- Additional inspection records: Review any project-specific testing or inspection requirements.
- Commercial quotation: Check quantity, price basis, taxes, freight, delivery terms and validity.
The required documentation will depend on the application and purchase order. Confirm these requirements before finalising the order.
7. Common Buying Mistakes to Avoid
Comparing prices without matching specifications
A price comparison is meaningful only when the grade, product form, dimensions and required standard are aligned.
Requesting a rate without dimensions
A supplier may be unable to quote accurately if the enquiry only states “Titanium Grade 2.” Provide the required diameter, thickness, length or drawing.
Ignoring documentation requirements
If the project requires traceability or material testing, state this before the order is confirmed.
Confusing pipe and tube requirements
Pipe and tube can be specified differently depending on their intended use and governing standard. Confirm the required product and specification rather than relying on the names alone.
Assuming every Titanium Grade 2 product is immediately available
Availability depends on dimensions, quantity, product form and supplier sourcing. Ask for confirmation of the exact requirement and delivery schedule.
Looking only at the price per kilogram
Cutting, packing, freight, taxes, inspection and documentation can affect the final procurement cost. Review the complete quotation.
8. Frequently Asked Questions
What is the price of Titanium Grade 2 per kg in India?
There is no single rate that applies to all Titanium Grade 2 products. The price depends on product form, dimensions, quantity, specification, documentation, market conditions and delivery terms. Request a current quotation for your exact requirement.
What is the price of Titanium Grade 2 round bar?
Round bar pricing depends on diameter, length, quantity, tolerances, applicable standard and current availability. Provide these details when requesting a quote.
Is Titanium Grade 2 more expensive than stainless steel?
Titanium Grade 2 and stainless steel have different material costs, properties and application requirements. A useful comparison must consider the specific grade, product dimensions, operating environment and total lifecycle requirements.
What is UNS R50400?
UNS R50400 is the Unified Numbering System designation for Titanium Grade 2. The material is also commonly identified as 3.7035.
Which ASTM standard should I specify for Titanium Grade 2?
The standard depends on the product form. ASTM B348/B348M is associated with bars and billets, ASTM B265 with sheet and plate, ASTM B338 with certain tubes, ASTM B861 with seamless pipe, and ASTM B862 with welded pipe. Verify the applicable standard and current edition before ordering.
Can I request Titanium Grade 2 with a material test certificate?
You can specify your documentation requirements when requesting a quotation. Confirm the exact documents, traceability and testing requirements with the supplier before placing the order.
What information should I send for a fast quotation?
Provide the grade, product form, dimensions, quantity, applicable standard, documentation requirements and delivery location. A drawing or bill of materials can help clarify complex requirements.
9. Request a Titanium Grade 2 Quotation from Manan Steel & Metals
Are you sourcing Titanium Grade 2 / UNS R50400 for industrial fabrication, chemical processing, marine equipment or another engineering requirement?
Manan Steel & Metals invites industrial buyers to submit their material specifications for a quotation enquiry.
Contact Manan Steel & Metals
- Phone: +91 79773 69869
- Email: manansteel@gmail.com
- Address: Shop No. 2, Hira Building, 97 Khetwadi Main Road, Girgaon, Mumbai – 400004, Maharashtra, India
- Website: https://www.manansteel.com/
When contacting the team, include your required product form, dimensions, quantity, standard and delivery destination.
Send your Titanium Grade 2 specifications to discuss your quotation requirement.
Suggested Internal Links
Confirm each URL on the live website before publishing.
- Titanium products: https://www.manansteel.com/
- Blog 1 – Titanium Grade 2 Supplier India: Link using the anchor text “Titanium Grade 2 supplier in India”.
- Blog 2 – Titanium Grade 2 Properties and Chemical Composition: Link using “Titanium Grade 2 properties”.
- Blog 3 – Titanium Grade 2 Applications in Chemical Processing and Marine Industries: Link using “Titanium Grade 2 applications”.
- Blog 4 – Titanium Grade 2 Specifications and Material Standards: Link using “Titanium Grade 2 specifications”.
Add contextual internal links within the article, rather than placing all links in a block at the bottom.
Recommended External Links
Use relevant, clickable references:
- ASTM International – ASTM B348/B348M
- ASTM International – Official standards catalogue
- METALCOR – Titanium Grade 2 technical datasheet
Verify the latest applicable standard edition and product requirements before publishing technical compliance statements.
Image SEO
Suggested image filename: titanium-grade-2-price-india-uns-r50400.jpg
Alt text: Titanium Grade 2 UNS R50400 material for industrial procurement and price enquiries in India
Suggested image concept: A premium industrial product photograph of titanium round bars and sheet material on a clean inspection table, with measuring instruments and technical drawings in the background.
Publishing Checklist
- Set the primary focus keyword to Titanium Grade 2 Price in India.
- Add the SEO title, meta description and URL slug.
- Include the focus keyword naturally in the opening paragraph.
- Add a table of contents with working links.
- Link to Blogs 1–4 using their verified published URLs.
- Include clickable authoritative outbound references.
- Avoid publishing an invented price or unverified availability claim.
- Add a clear enquiry CTA and verified contact details.
- Check keyword repetition and readability in Rank Math.
- Preview the article on desktop and mobile.