Super Duplex 2507 Chemical Composition, Mechanical Properties and Corrosion Resistance

Super Duplex 2507

Super Duplex 2507 is a high-alloy duplex stainless steel developed for applications that require a combination of high mechanical strength and resistance to aggressive corrosive environments. Identified by UNS S32750 and EN 1.4410, this grade is widely considered for offshore equipment, seawater systems, chemical processing and other demanding industrial applications.

The performance of Super Duplex 2507 is closely connected to its chemical composition, particularly its chromium, molybdenum and nitrogen content. Its two-phase austenitic-ferritic microstructure also contributes to its mechanical properties and corrosion behaviour.

For engineers, material buyers and procurement professionals, understanding these characteristics is important when selecting Super Duplex 2507 round bars and other product forms.

Manan Steel & Metals supplies specialty metals for industrial and engineering requirements. This article explains the composition, mechanical properties, physical characteristics and corrosion resistance of Super Duplex 2507.

1. What Makes Super Duplex 2507 a High-Alloy Stainless Steel?

Super Duplex 2507 belongs to the duplex stainless steel family. Unlike conventional austenitic stainless steels, its microstructure contains two main phases:

  • Austenite
  • Ferrite

The balance between these phases is important for achieving the intended mechanical and corrosion properties.

The grade is commonly identified by:

Material identificationDesignation
GradeSuper Duplex 2507
UNS designationS32750
EN material number1.4410
EN designationX2CrNiMoN25-7-4
Material familySuper Duplex Stainless Steel

The alloy is designed for demanding chloride-containing environments where resistance to localised corrosion and high mechanical strength are important.

2. Super Duplex 2507 Chemical Composition

The chemical composition of Super Duplex 2507 is a major factor behind its corrosion resistance and strength.

The following table shows commonly specified composition limits for UNS S32750. The exact requirements must be checked against the applicable product standard and material certificate.

ElementCommon composition range or limit (%)
Chromium (Cr)24.0–26.0
Nickel (Ni)6.0–8.0
Molybdenum (Mo)3.0–5.0
Nitrogen (N)0.24–0.32
Carbon (C)0.030 max
Manganese (Mn)1.20 max
Silicon (Si)0.80 max
Phosphorus (P)0.035 max
Sulphur (S)0.020 max
Copper (Cu)0.50 max
Iron (Fe)Balance

These values are commonly referenced limits; the governing specification may contain additional requirements. The actual heat analysis should always be verified through the supplied MTC.

Role of Chromium

Chromium supports the formation of a protective passive surface layer on stainless steel.

In Super Duplex 2507, the high chromium content contributes to resistance against general corrosion and localised corrosion.

Role of Nickel

Nickel helps stabilise the austenitic phase within the duplex microstructure.

It contributes to the balance between ferrite and austenite, which is important for the material’s overall performance.

Role of Molybdenum

Molybdenum improves resistance to pitting and crevice corrosion, particularly in chloride-containing environments.

It is one of the important alloying elements that distinguishes Super Duplex 2507 from many conventional stainless steel grades.

Role of Nitrogen

Nitrogen contributes to strength and improves resistance to localised corrosion.

It also helps maintain the required balance between the austenitic and ferritic phases.

3. Mechanical Properties of Super Duplex 2507

Super Duplex 2507 is recognised for its high mechanical strength.

For reference, Alleima publishes the following mechanical properties for its SAF 2507 solid bar in the solution-annealed and quenched condition:

Mechanical propertyPublished value
0.2% proof strength550 MPa minimum
Ultimate tensile strength760–930 MPa
Elongation25% minimum
HardnessMaximum 28 HRC

These are manufacturer-published values for the stated bar product and condition. They should not be assumed to apply automatically to every size, product form or specification.

Yield Strength

Yield strength indicates the stress at which a material begins to deform permanently.

The high proof strength of Super Duplex 2507 can support component designs exposed to substantial mechanical loading.

Tensile Strength

Tensile strength represents the maximum tensile stress a material withstands during a tensile test before failure.

The strength of Super Duplex 2507 makes it useful for selected industrial components where load-bearing capacity is important.

Elongation

Elongation indicates the material’s ability to deform plastically before fracture.

It is an important consideration when evaluating material suitability for forming, fabrication and component design.

Hardness

Hardness is relevant to wear considerations, machining and manufacturing processes.

The permitted hardness should be checked against the applicable material specification and delivery condition.

4. Physical Properties of Super Duplex 2507

Physical properties help engineers assess material behaviour during design, fabrication and operation.

Representative values published for SAF 2507 include:

Physical propertyApproximate value
Density7.8 g/cm³
Elastic modulus at 20°C200 GPa
Thermal conductivity at 20°C14 W/m·°C
Specific heat capacity at 20°C490 J/kg·°C
Electrical resistivity at 20°C0.83 μΩ·m

These are reference values from a particular manufacturer datasheet. Values can vary with temperature and product condition.

Thermal Expansion

Super Duplex 2507 has a coefficient of thermal expansion closer to carbon steel than many austenitic stainless steels.

This characteristic can be useful in certain equipment designs involving different material types.

5. Corrosion Resistance of Super Duplex 2507

Corrosion resistance is one of the most important reasons for selecting Super Duplex 2507.

Its chromium, molybdenum and nitrogen content contributes to its performance in chloride-bearing environments.

Resistance to Pitting Corrosion

Pitting corrosion is a localised form of attack that creates small cavities or holes on a metal surface.

It can be a serious concern in seawater systems, chemical-processing equipment and chloride-rich environments.

Super Duplex 2507 offers high resistance to pitting corrosion due to its alloy composition.

Resistance to Crevice Corrosion

Crevice corrosion occurs in confined spaces where stagnant corrosive liquid can accumulate.

Common locations include:

  • Gasket interfaces
  • Bolted joints
  • Overlapping surfaces
  • Restricted equipment spaces

The high chromium, molybdenum and nitrogen content contributes to the grade’s resistance to this corrosion mechanism.

Resistance to Chloride Stress Corrosion Cracking

Chloride stress corrosion cracking can occur when susceptible materials experience tensile stress in chloride-containing environments.

Super Duplex 2507 is designed to provide excellent resistance to chloride-induced stress corrosion cracking under suitable operating conditions.

Resistance to General Corrosion

The alloy provides good resistance to several organic acids and selected inorganic acid environments.

However, corrosion performance depends on chemical concentration, temperature, impurities, flow conditions and exposure duration.

Material selection should therefore be based on the actual process environment.

6. Understanding PREN in Super Duplex 2507

PREN stands for Pitting Resistance Equivalent Number. It is an empirical index used to compare the relative pitting resistance of stainless steel grades.

A commonly used formula for duplex stainless steels is:

PREN = %Cr + 3.3 × %Mo + 16 × %N

For Super Duplex 2507, the PREN is generally around or above 40, depending on the actual chemical composition and the calculation basis.

Alleima publishes a minimum PRE value of 41 for its SAF 2507 bar material.

A higher PREN generally indicates greater potential resistance to pitting corrosion. However, PREN is not a guarantee of performance in every environment.

Actual corrosion behaviour also depends on the microstructure, surface condition, fabrication quality and service conditions.

7. Importance of the Duplex Microstructure

The two-phase structure is central to the performance of Super Duplex 2507.

In the solution-annealed and quenched condition, Alleima reports austenitic-ferritic microstructure with approximately 35–55% ferrite for its SAF 2507 material.

Maintaining the correct phase balance is important.

An unsuitable thermal history can lead to the formation of undesirable intermetallic phases, which may reduce toughness and corrosion resistance.

For this reason, heat treatment, welding and fabrication must follow appropriate procedures.

Material buyers should specify the required delivery condition and verify compliance with the relevant product standard.

8. Temperature Considerations for Super Duplex 2507

Super Duplex 2507 is selected primarily for its combination of strength and corrosion resistance, but temperature exposure must be considered carefully.

Prolonged exposure above approximately 250°C can cause microstructural changes and reduce impact strength.

The effect depends on exposure duration and operating conditions.

For applications involving elevated temperatures, engineering review should consider:

  • Operating temperature
  • Exposure duration
  • Mechanical loading
  • Corrosive environment
  • Applicable design code
  • Material condition

The grade should not be selected solely on the basis of its room-temperature properties.

9. Industrial Applications Based on Material Properties

The combination of high strength and corrosion resistance makes Super Duplex 2507 suitable for consideration in several industrial sectors.

Offshore and Oil & Gas

Used in selected equipment and components exposed to chloride-bearing environments and demanding service conditions.

Seawater Cooling Systems

Its resistance to pitting and crevice corrosion makes it relevant to selected seawater-handling equipment.

Desalination Plants

The alloy is considered for components exposed to seawater and concentrated brine, subject to process conditions.

Chemical and Petrochemical Plants

Selected process equipment may require materials with resistance to aggressive chemical environments.

Pumps and Mechanical Components

Super Duplex 2507 round bars can be used as raw material for manufacturing shafts, machined components and other parts requiring high strength and corrosion resistance.

10. Material Verification and Testing

When purchasing Super Duplex 2507, buyers should verify more than the grade name.

Important checks include:

  • Chemical composition
  • Tensile properties
  • Yield or proof strength
  • Elongation
  • Hardness, where specified
  • Heat-treatment condition
  • Product standard
  • Heat-number traceability
  • Material Test Certificate

Some projects may also specify supplementary testing, such as impact testing, corrosion testing or ferrite measurement.

Such requirements should be stated in the purchase order and confirmed against the applicable specification.

11. Super Duplex 2507 Material Enquiries at Manan Steel & Metals

Manan Steel & Metals, established in 2007, supplies specialty metals for industrial, engineering and manufacturing requirements.

For Super Duplex 2507 enquiries, buyers can share their required product form, dimensions, quantity, applicable standard and documentation requirements.

We also handle enquiries for specialty stainless steel and alloy grades.

Contact Manan Steel & Metals:

Website: https://manansteel.com/
Email: sales@manansteel.com
Phone: +91 98198 76962

Explore our round bar supply range or contact our team with your material requirement.

Frequently Asked Questions

1. What is the chemical composition of Super Duplex 2507?

Super Duplex 2507 typically contains 24–26% chromium, 6–8% nickel, 3–5% molybdenum and 0.24–0.32% nitrogen. The complete composition must be checked against the applicable standard.

2. What is the UNS designation of Super Duplex 2507?

The UNS designation is S32750. Its European material number is 1.4410.

3. What is the yield strength of Super Duplex 2507?

A manufacturer-published reference for SAF 2507 bar in the solution-annealed and quenched condition gives a minimum 0.2% proof strength of 550 MPa. Requirements can differ with product form, dimensions and specification.

4. What is the tensile strength of Super Duplex 2507?

For the referenced SAF 2507 bar condition, the published tensile strength range is 760–930 MPa. Always verify the required value against the product certificate.

5. What does PREN mean in Super Duplex 2507?

PREN means Pitting Resistance Equivalent Number. It is an empirical index calculated using chromium, molybdenum and nitrogen content to compare the relative pitting resistance of stainless steels.

6. Is Super Duplex 2507 resistant to seawater corrosion?

It offers high resistance to several forms of chloride-related corrosion and is used in selected seawater applications. Actual suitability depends on temperature, flow, oxygen levels, deposits and design conditions.

7. Why is nitrogen added to Super Duplex 2507?

Nitrogen contributes to mechanical strength, supports the austenitic phase and improves resistance to localised corrosion.

8. Can Super Duplex 2507 be used at elevated temperatures?

Temperature exposure must be evaluated carefully. Prolonged exposure above approximately 250°C can change the microstructure and reduce impact strength. Application-specific engineering assessment is recommended.


SEO DETAILS

SEO Title: Super Duplex 2507 Chemical Composition & Properties

Focus Keyword: Super Duplex 2507 chemical composition

Secondary Keywords:

  • Super Duplex 2507 mechanical properties
  • UNS S32750 chemical composition
  • Super Duplex 2507 corrosion resistance
  • 2507 stainless steel properties
  • S32750 yield strength
  • S32750 tensile strength
  • Super Duplex 2507 PREN
  • 1.4410 stainless steel properties

URL Slug: super-duplex-2507-chemical-composition-mechanical-properties

Meta Description: Understand Super Duplex 2507 chemical composition, mechanical properties, PREN, corrosion resistance and industrial applications of UNS S32750.

Featured Image Filename: super-duplex-2507-chemical-composition-properties.jpg

Featured Image Alt Text: Super Duplex 2507 UNS S32750 chemical composition and material properties

Featured Image Caption: Super Duplex 2507 chemical composition, mechanical strength and corrosion resistance.

INTERNAL LINKS

  1. Manan Steel & Metals
  2. Round Bar Supply Range
  3. Stainless Steel Round Bar Supply
  4. Contact Manan Steel & Metals

EXTERNAL AUTHORITY LINKS

  1. Alleima – SAF 2507 Bar Technical Datasheet
  2. Alleima – SAF 2507 Material Information
  3. Alleima – SAF 2507 Billets Datasheet

PUBLISHING CHECKLIST

  • Use the article title as the only H1.
  • Add the focus keyword in the SEO title and meta description.
  • Use the focus keyword naturally in the introduction and relevant headings.
  • Add the featured image with the supplied filename and alt text.
  • Include the internal links within the article.
  • Keep the external authority links clickable and followed.
  • Confirm that the contact details and enquiry links work.
  • Review the final Rank Math analysis after publishing.