Super Duplex 2507 Round Bar
Super Duplex 2507 round bar is used in demanding industrial environments where high mechanical strength and resistance to corrosion are important. Identified by UNS S32750, this super duplex stainless steel combines an austenitic-ferritic microstructure with high chromium, molybdenum and nitrogen content.
It is considered for applications involving seawater, chloride-bearing environments, offshore equipment, chemical processing and other corrosive service conditions.
For buyers and procurement professionals, selecting the correct Super Duplex 2507 round bar requires attention to the material designation, applicable standard, dimensions, heat-treatment condition, testing and traceability.
Manan Steel & Metals supplies specialty metals for industrial and engineering requirements. This guide covers the important technical and purchasing considerations when sourcing Super Duplex 2507 round bars.
Table of Contents
ToggleSuper Duplex 2507 is a high-alloy duplex stainless steel designed for demanding corrosive environments. Its microstructure contains both austenitic and ferritic phases.
The material is commonly identified by the following designations:
| Identification | Designation |
|---|---|
| Grade | Super Duplex 2507 |
| UNS number | S32750 |
| EN material number | 1.4410 |
| EN grade name | X2CrNiMoN25-7-4 |
| Common commercial designation | 2507 |
The grade contains approximately 25% chromium, 7% nickel and 4% molybdenum, along with nitrogen. Exact permitted composition ranges depend on the applicable material specification.
Its combination of alloying elements contributes to resistance against chloride-induced pitting, crevice corrosion and stress corrosion cracking.
The chemical composition of Super Duplex 2507 is an important factor behind its corrosion resistance and mechanical performance.
Typical specified composition limits are shown below. The purchase specification and material test certificate should be used to verify the actual heat analysis.
| Element | Typical composition requirement (%) |
|---|---|
| Chromium (Cr) | 24.0–26.0 |
| Nickel (Ni) | 6.0–8.0 |
| Molybdenum (Mo) | 3.0–5.0 |
| Nitrogen (N) | 0.24–0.32 |
| Carbon (C) | 0.030 max |
| Manganese (Mn) | 1.20 max |
| Silicon (Si) | 0.80 max |
| Phosphorus (P) | 0.035 max |
| Sulphur (S) | 0.020 max |
| Copper (Cu) | 0.50 max |
| Iron (Fe) | Balance |
The chromium and molybdenum content contributes to resistance against localised corrosion. Nitrogen also supports strength and corrosion performance.
For critical applications, buyers should check the complete chemical analysis and any project-specific requirements rather than relying only on nominal composition.
Super Duplex 2507 is known for its high strength compared with many conventional austenitic stainless steel grades.
For reference, commonly published minimum mechanical requirements for UNS S32750 under certain product specifications include:
| Mechanical property | Typical minimum reference |
|---|---|
| Tensile strength | 800 MPa |
| 0.2% proof strength | 550 MPa |
| Elongation | 15% |
Important: These values must not be treated as universal guaranteed values for every round bar. Requirements vary with the applicable specification, product form, dimensions, heat-treatment condition and test direction. Always verify the governing standard and MTC.
The high strength of Super Duplex 2507 can be useful in component designs where mechanical loading and corrosion resistance must be considered together.
One of the main reasons industries consider Super Duplex 2507 is its resistance to several forms of corrosion.
Chloride-containing environments can create stress corrosion cracking concerns in susceptible stainless steels. Super Duplex 2507 is designed to offer strong resistance to this form of attack under suitable operating conditions.
Pitting is a localised corrosion mechanism that can cause concentrated material damage. The chromium, molybdenum and nitrogen content of Super Duplex 2507 contributes to its resistance to chloride-induced pitting.
Crevice corrosion can occur in restricted spaces where corrosive liquid becomes trapped. Super Duplex 2507 is considered for equipment where this corrosion mechanism is a design concern.
The alloy also provides good resistance to a range of aggressive environments. However, material suitability depends on the actual chemical composition of the process fluid, temperature, concentration, flow conditions and exposure duration.
Super Duplex 2507 round bars are used as raw material for machining and manufacturing components that require a combination of strength and corrosion resistance.
Common application areas include:
Selected offshore components operate in chloride-rich environments and demanding service conditions. Super Duplex 2507 may be considered for suitable machined parts and equipment components.
Marine applications can expose components to seawater, salt deposits and corrosive operating conditions. The grade is considered for selected seawater-related equipment.
Chemical-processing plants use corrosion-resistant materials in equipment and components exposed to aggressive process fluids.
Desalination systems handle seawater and concentrated brine. Super Duplex 2507 may be selected for suitable components where corrosion resistance and mechanical strength are required.
Round bars can be used as raw material for manufacturing selected pump shafts, valve components and machined parts. The final component design and service conditions determine the appropriate material.
The applicable specification depends on the product form and intended use.
For Super Duplex 2507, commonly referenced standards include:
| Product form | Common specification |
|---|---|
| Bars and certain other wrought products | ASTM A479 |
| Bars and shapes | ASTM A276, where applicable |
| Forgings and flanges | ASTM A182 Grade F53 |
| Sheet, plate and strip | ASTM A240 |
| Seamless and welded tubes | ASTM A789 |
| Pipe | ASTM A790 |
European product standards may also refer to EN 10088-3 for bar products.
Do not assume that all specifications are interchangeable. Confirm the exact product form, grade, standard edition, supplementary requirements and project code before ordering.
For technical product information, refer to Alleima’s SAF 2507 material datasheet.
Industrial buyers should check several details before finalising a purchase.
Confirm that the requested grade is Super Duplex 2507, UNS S32750, and that the material documentation identifies the same grade.
Specify the required round bar diameter, length and quantity. If machining is planned, clarify whether the requested size is the raw-material dimension or the finished component dimension.
State the required material condition, such as solution-annealed condition, where applicable to the specification and order.
Mention the required diameter tolerance, straightness and length tolerance. These requirements can affect machining and component manufacturing.
Confirm whether the order requires chemical analysis, mechanical testing, hardness testing, additional inspection or third-party inspection.
Specify the required MTC and traceability level. Ensure that the supplied certificate corresponds to the material being delivered.
For industrial procurement, documentation is an essential part of material verification.
A Material Test Certificate may include:
Where required by the purchase order, buyers may specify EN 10204 Type 3.1 documentation or another agreed inspection-documentation requirement.
The heat number marked on the material should be traceable to the relevant certificate wherever the project requires it.
To help suppliers evaluate an enquiry accurately, buyers should provide:
Complete enquiry details help reduce clarification time and support accurate quotation.
Manan Steel & Metals, established in 2007, supplies specialty metals for industrial, engineering and manufacturing requirements.
Our product range includes specialty stainless steel and alloy grades for buyers seeking materials for demanding applications.
For Super Duplex 2507 enquiries, buyers can share their required diameter, length, quantity, specification and documentation requirements for review.
Send your material enquiry:
Website: https://manansteel.com/
Email: sales@manansteel.com
Phone: +91 98198 76962
Explore our round bar supply range or contact Manan Steel & Metals with your requirement.
The UNS designation of Super Duplex 2507 is S32750. Its European material number is 1.4410.
ASTM A479 is a commonly referenced specification for stainless steel bars and shapes, including applicable S32750 products. ASTM A276 may also be relevant depending on the product and order requirements.
It is used in selected seawater and marine applications because of its resistance to chloride-induced pitting, crevice corrosion and stress corrosion cracking. Suitability must be assessed against actual service conditions.
The alloy typically contains 24–26% chromium, 6–8% nickel, 3–5% molybdenum and 0.24–0.32% nitrogen, subject to the governing specification.
They are used as raw material for selected shafts, pump and valve components, machined parts and other industrial components requiring high strength and corrosion resistance.
Buyers should verify the material test certificate, grade identification, heat number, chemical analysis, mechanical test results and compliance with the specified product standard.
Yes. They can be machined using suitable tooling and controlled machining practices. Their high strength and work-hardening behaviour require appropriate process planning.
SEO Title: Super Duplex 2507 Round Bar: Properties & Specifications
Focus Keyword: Super Duplex 2507 round bar
Secondary Keywords:
URL Slug: super-duplex-2507-round-bar-properties-specifications-guide
Meta Description: Explore Super Duplex 2507 round bar properties, UNS S32750 specifications, corrosion resistance, industrial applications and buying considerations.
Featured Image Filename: super-duplex-2507-s32750-round-bar.jpg
Featured Image Alt Text: Super Duplex 2507 UNS S32750 stainless steel round bars
Featured Image Caption: Super Duplex 2507 round bars for demanding industrial and corrosion-resistant applications.