Hastelloy C276 Bars, Sheets and Plates
Hastelloy C276 is a nickel-molybdenum-chromium alloy developed for demanding environments where corrosion resistance is a major material-selection requirement. It is used in chemical processing equipment, pollution-control systems, heat exchangers, pressure-handling components and other industrial applications exposed to aggressive chemicals.
For procurement teams, selecting Hastelloy C276 involves more than specifying the alloy name. The product form, applicable material standard, dimensions, manufacturing condition, inspection requirements and documentation must all match the component’s engineering requirements.
Manan Steel & Metals supplies specialty metals, including Hastelloy C276, for industrial and engineering requirements. This guide explains the key considerations when sourcing C276 bars, sheets and plates.
Table of Contents
ToggleHastelloy C276 is a nickel-based corrosion-resistant alloy identified by:
Its alloying elements contribute to resistance against a broad range of corrosive environments. The material is considered for applications involving reducing and oxidising conditions, subject to the actual chemical concentration, temperature and operating conditions.
C276 is selected for applications where ordinary stainless steel may not provide the required corrosion performance.
The correct product form depends on the component design, manufacturing process and final application.
Hastelloy C276 round bars are used in machining and component manufacturing. Typical applications include:
When enquiring about round bars, specify the required diameter, length, quantity and applicable specification.
Explore Manan Steel & Metals’ round bar supply range.
C276 sheets are considered for fabricated components and equipment where relatively thin material sections are required.
Potential applications include:
The required thickness, width, length and surface condition should be confirmed before ordering.
Hastelloy C276 plates are used in heavier fabricated structures and equipment components.
Potential applications include:
Plate procurement should include the required thickness, dimensions, material specification and inspection requirements.
Material standards are important because the applicable specification can vary with the product form.
The following specifications are associated with Hastelloy C276 in the technical information published by Haynes International:
| Product form | Common ASTM specification |
|---|---|
| Rods and bars | ASTM B574 |
| Sheets, plates and strips | ASTM B575 |
| Seamless pipes and tubes | ASTM B622 |
| Welded pipes and tubes | ASTM B619 |
| Fittings | ASTM B366 |
| Forgings | ASTM B564 |
The corresponding ASME material specifications are commonly identified with the prefix SB, such as SB-574 and SB-575.
Important: The required standard, edition, product form and supplementary requirements should be confirmed against the purchase order and applicable engineering code. A material designation alone does not establish compliance with every project requirement.
For official technical information, refer to the Hastelloy C276 specifications published by Haynes International.
There is no single standard size that suits every industrial requirement. Buyers should provide the dimensions required by their drawings or manufacturing process.
For round bars, specify:
For machined components, it is useful to clarify whether the dimensions refer to the finished component or the raw material required for machining.
For sheets, specify:
For plates, provide:
Providing complete dimensions helps suppliers assess the requirement accurately and reduces delays caused by repeated clarification.
Documentation is an important part of purchasing nickel-based alloys for industrial applications.
Buyers should confirm the documentation required before placing an order.
A Material Test Certificate (MTC) may provide information such as:
The certificate should correspond to the material being supplied.
Heat-number traceability helps connect the physical material to its manufacturing and inspection records.
For projects requiring traceability, buyers should confirm that the identification markings and supplied documents are consistent.
Some projects require inspection by an independent inspection agency.
If applicable, confirm the following before ordering:
Third-party inspection should not be assumed to be included unless agreed in the purchase order.
A detailed enquiry helps avoid material mismatches and procurement delays.
Consider the following checklist:
For critical equipment, the final material selection and acceptance requirements should be approved by the responsible engineering team.
Hastelloy C276 is considered across industries where resistance to aggressive process environments is important.
Used in selected reactors, process vessels, piping components and equipment exposed to corrosive chemicals.
Considered for flue-gas desulfurisation equipment, scrubber components and other pollution-control systems, depending on process conditions.
Used in selected components exposed to demanding corrosive service environments. Suitability must be evaluated against the actual operating conditions and applicable project requirements.
Selected equipment may use C276 where corrosion resistance and material compatibility are important.
C276 may be considered for certain aggressive marine or process environments. Actual seawater chemistry, temperature, flow conditions and crevice exposure must be evaluated before selection.
Nickel alloys can have similar commercial descriptions but different chemical compositions, mechanical properties and application limits.
When purchasing Hastelloy C276, verify that the material is identified as UNS N10276 and that the supplied product form and documentation match the purchase specification.
Do not rely only on a generic description such as nickel alloy or corrosion-resistant alloy. Confirm the grade, standard, dimensions and traceability requirements in writing.
For additional technical information, consult the Nickel Institute and the official Haynes International C276 technical data.
Manan Steel & Metals, established in 2007, supplies specialty metals for industrial, engineering and manufacturing requirements.
We handle enquiries for materials including Hastelloy C276 and other nickel-based and specialty alloys.
Buyers can share their requirements for:
Our team can review the enquiry details and respond regarding the material requirement, subject to confirmation of specifications and availability.
Request a quotation:
Website: https://manansteel.com/
Email: sales@manansteel.com
Phone: +91 98198 76962
You can also contact Manan Steel & Metals with your grade, dimensions, quantity and documentation requirements.
The UNS designation of Hastelloy C276 is N10276. Its Werkstoff number is 2.4819.
ASTM B574 is the commonly referenced specification for Hastelloy C276 rods and bars. Confirm the exact specification and requirements for the ordered product.
ASTM B575 is the commonly referenced specification for Hastelloy C276 sheet, plate and strip products.
Yes. They are considered for selected chemical-processing equipment and components exposed to aggressive corrosive environments. Final suitability depends on the actual process conditions.
Include the grade, UNS designation, product form, dimensions, quantity, applicable standard, required condition and documentation or inspection requirements.
An MTC helps verify material identification and provides relevant test information. Buyers should specify the required certificate and traceability level in the purchase order.
Requirements can be evaluated based on the requested product form, dimensions, quantity and availability. Buyers should share their drawings or dimensional specifications for confirmation.
SEO Title: Hastelloy C276 Bars, Sheets and Plates: Sizes & Standards
Focus Keyword: Hastelloy C276 sizes
Secondary Keywords:
URL Slug: hastelloy-c276-bars-sheets-plates-standards-procurement-guide
Meta Description: Explore Hastelloy C276 sizes, ASTM standards for bars, sheets and plates, MTC requirements and procurement tips for industrial buyers.
Featured Image Filename: hastelloy-c276-bars-sheets-plates-procurement-guide.jpg
Featured Image Alt Text: Hastelloy C276 round bars, sheets and plates for industrial applications
Featured Image Caption: Hastelloy C276 product forms, material standards and procurement considerations.