Alloy A286 Round Bar Sizes, ASTM Standards, MTC and Procurement Guide

Alloy A286 Round Bar Sizes

Alloy A286 round bar is used in engineering and industrial applications that require high strength, oxidation resistance and reliable performance at elevated temperatures. This age-hardenable iron-nickel-chromium alloy is commonly identified as UNS S66286, Grade 660 and Werkstoff 1.4980.

It is selected for applications such as aerospace fasteners, gas-turbine components, high-temperature bolts, studs and specialised industrial parts.

For buyers, choosing the correct Alloy A286 round bar involves more than confirming the grade. Diameter, length, material condition, applicable ASTM or AMS specification, testing requirements and material traceability must all be considered.

This guide explains the important procurement points for purchasing Alloy A286 round bars in India.

1. What Is Alloy A286 Round Bar?

Alloy A286 is a precipitation-hardening austenitic iron-based superalloy containing nickel, chromium, titanium and molybdenum.

Its strength can be increased through controlled solution treatment and precipitation ageing. The alloy is used in selected applications requiring a combination of high mechanical strength, oxidation resistance and performance at elevated temperatures.

A286 is also known by these designations:

  • UNS S66286
  • Grade 660 or Type 660 in relevant specifications
  • Werkstoff 1.4980
  • Alloy A-286

Buyers should confirm the exact designation and governing specification rather than relying only on a trade name.

2. Alloy A286 Round Bar Sizes and Dimensions

Alloy A286 round bars are used as raw material for machining and manufacturing precision components.

The required size depends on the finished component, machining allowance and applicable product specification.

Common dimensional details to specify include:

ParameterWhat the buyer should confirm
DiameterRequired nominal diameter in mm or inches
LengthRequired standard or cut length
TolerancePermissible dimensional variation
Surface conditionAs supplied, machined or another specified finish
StraightnessRequired straightness for the application
QuantityNumber of pieces or total weight
Material conditionSolution treated, aged or another specified condition

Common Round Bar Diameter Requirements

Buyers may enquire for small, medium or large diameter A286 round bars depending on their manufacturing requirements.

There is no single universal size range that applies to every producer or specification. Available diameters, lengths and tolerances should be confirmed with the supplier.

For accurate procurement, provide the required diameter and length rather than relying on a general size chart.

How to Estimate Alloy A286 Round Bar Weight

The approximate theoretical weight of a round bar can be calculated using:

Weight (kg) = D² × L × 0.00623

Where:

  • D = Diameter in millimetres
  • L = Length in metres
  • 0.00623 = Approximate calculation factor using a density of about 7.98 g/cm³

For example, a theoretical 25 mm diameter bar with a length of 1 metre weighs approximately:

25 × 25 × 1 × 0.00623 = 3.89 kg

Actual supplied weight can vary due to dimensional tolerances and material density.

For additional calculations, refer to the Manan Steel & Metals round bar weight chart.

3. ASTM and AMS Standards for Alloy A286 Round Bar

Selecting the correct material specification is one of the most important steps when purchasing A286.

Different standards cover different product forms and requirements. A specification for sheet or plate should not automatically be used for round bars.

Common references include:

StandardGeneral scope
ASTM A638Heat-resisting alloy steel bars, forgings and forging stock
AMS 5731A286 bars, forgings, tubing and rings in the specified solution-treated condition
AMS 5732A286 bars, forgings, tubing and rings in the specified solution-treated and aged condition
AMS 5734A286 long-product forms in the specified 1650°F solution-treated condition
AMS 5737A286 long-product forms in the specified 1650°F solution-treated and aged condition
ASTM A453 Grade 660High-temperature bolting materials

ASTM A638 Grade 660

ASTM A638 covers heat-resisting alloy steel bars, forgings and forging stock intended for high-temperature service.

When ordering A286 under ASTM A638, buyers should identify the required grade or type and applicable supplementary requirements.

The purchase order should clearly state the required standard and product form.

AMS 5731 and AMS 5732

These specifications are relevant to A286 long-product forms, including bars.

The distinction between solution-treated and aged conditions is important:

  • AMS 5731 covers the specified 1800°F solution-treated condition.
  • AMS 5732 covers the specified 1800°F solution-treated and precipitation-aged condition.

AMS 5734 and AMS 5737

These specifications cover corresponding A286 product conditions using the specified 1650°F solution-treatment route:

  • AMS 5734: specified solution-treated condition.
  • AMS 5737: specified solution-treated and aged condition.

The required specification must match the engineering drawing or purchase order.

For technical details, refer to the ATI A286 specification and product information.

4. Why Material Condition Matters When Buying A286 Bars

A286 is an age-hardenable alloy. Its mechanical properties depend significantly on the heat-treatment condition.

The two broad conditions buyers commonly need to distinguish are:

Solution-Treated Condition

In this condition, the material has undergone solution heat treatment and is generally more suitable for subsequent fabrication and machining than the aged condition.

The exact mechanical properties must be checked against the applicable specification.

Solution-Treated and Aged Condition

The material undergoes precipitation ageing after solution treatment to develop higher strength and hardness.

This condition is used where the component requires the mechanical properties specified by the relevant standard.

Which Condition Should Buyers Select?

The correct condition depends on the component’s intended use.

Before placing an order, confirm:

  • Whether machining will take place before or after ageing
  • Required tensile and yield strength
  • Required hardness
  • Applicable heat-treatment specification
  • Whether the finished component requires additional processing

Do not assume that all A286 round bars are supplied in the same condition or have identical mechanical properties.

5. What Is an Alloy A286 Material Test Certificate?

A Material Test Certificate (MTC) is an important document for verifying the identity and tested properties of supplied material.

For critical industrial and engineering applications, buyers should request an MTC that corresponds to the actual material supplied.

An A286 MTC may include the following information, depending on the purchase specification:

  • Material grade and designation
  • UNS number S66286
  • Applicable ASTM or AMS specification
  • Heat or lot number
  • Chemical composition
  • Mechanical test results
  • Heat-treatment condition
  • Hardness test results, where required
  • Product form and dimensions
  • Manufacturer or processor identification
  • Inspection and certification details

Why Is the Heat Number Important?

The heat number connects the supplied material to its production and test records.

It helps buyers and quality-control teams verify that the documentation corresponds to the actual material received.

The heat number on the material identification and the certificate should be checked for consistency.

What Should Buyers Verify on an A286 MTC?

Before accepting the material, check:

  1. The grade is identified as A286 or UNS S66286.
  2. The specified ASTM or AMS standard is mentioned.
  3. The chemical composition meets the required limits.
  4. Mechanical test results meet the applicable specification.
  5. The stated heat-treatment condition matches the purchase order.
  6. Heat or lot identification is traceable.
  7. Required inspection and supplementary documents are included.

An MTC should not be accepted solely because it mentions A286. The certificate must satisfy the actual purchase requirements.

6. Chemical Composition of Alloy A286

A286 contains several alloying elements that contribute to its strength, oxidation resistance and high-temperature characteristics.

The following table gives commonly published composition limits. The exact limits must be checked against the applicable material specification and its revision.

ElementComposition by weight
Nickel (Ni)24.0–27.0%
Chromium (Cr)13.5–16.0%
Titanium (Ti)1.90–2.35%
Molybdenum (Mo)1.0–1.5%
Vanadium (V)0.10–0.50%
Manganese (Mn)2.0% max
Silicon (Si)1.0% max
Aluminium (Al)0.35% max
Carbon (C)0.08% max
Iron (Fe)Balance

The composition table is useful for preliminary grade identification, but the governing specification and MTC determine whether a particular heat complies.

7. Mechanical Properties and Testing Requirements

Mechanical properties are especially important when A286 is used for high-strength fasteners, turbine hardware and precision-engineered components.

Depending on the specified condition and product form, the purchase specification may require testing for:

  • Tensile strength
  • Yield strength
  • Elongation
  • Reduction of area
  • Hardness
  • Other specified mechanical or supplementary tests

For example, ATI publishes mechanical-property information for A286 sheet and plate under AMS 5525. Those figures must not automatically be applied to round bars.

Important: Mechanical-property limits for A286 bars must be taken from the exact bar specification, grade or type, heat-treatment condition and applicable revision.

Refer to the ATI A286 technical data sheet for product-form-specific technical information.

8. Applications of Alloy A286 Round Bar

A286 round bars are used as raw material for machining components where high strength and elevated-temperature performance are required.

Common application areas include:

Aerospace Engineering

  • High-strength fasteners
  • Engine hardware
  • Selected turbine components
  • Specialised aircraft components

Automotive Engineering

  • High-temperature engine fasteners
  • Specialised bolts and studs
  • Selected performance-engine components

Gas Turbines and Power Generation

  • Turbine hardware
  • High-temperature fasteners
  • Selected machined components

Industrial Equipment

  • Precision-machined shafts and pins
  • Specialised threaded components
  • High-strength studs and bolts
  • Selected process and engineering equipment parts

The final component design and operating conditions determine whether A286 is suitable.

9. How to Select the Right Alloy A286 Round Bar Supplier

Choosing the right supplier is important for maintaining material traceability and meeting purchase requirements.

Before finalising an order, buyers should evaluate the following:

1. Grade confirmation: Ensure the supplier can confirm the required A286 or UNS S66286 designation.

2. Specification: Clearly state ASTM A638, the relevant AMS specification or another approved requirement.

3. Dimensions: Specify diameter, length, tolerances and quantity.

4. Material condition: Confirm whether solution-treated or solution-treated and aged material is required.

5. Documentation: Ask for the MTC and any additional inspection documents required.

6. Traceability: Check heat-number identification and certificate matching.

7. Delivery requirements: Confirm delivery location, packing and dispatch expectations.

8. Technical clarification: Resolve any uncertainty about specification, testing or condition before issuing the purchase order.

10. Alloy A286 Round Bar Supplier in Mumbai, India

Manan Steel & Metals deals in specialty steel and alloy products for industrial and engineering requirements.

Established in 2007, the company caters to buyers looking for specialty grades used in precision machining, manufacturing and specialised industrial applications.

For an enquiry regarding Alloy A286 round bar, share your exact requirements so that the grade, dimensions and documentation can be checked.

Details to include in your enquiry:

  • Alloy A286 / UNS S66286
  • Required diameter and length
  • Quantity
  • ASTM or AMS specification
  • Required heat-treatment condition
  • MTC and inspection requirements
  • Delivery location

Availability, dimensions, material condition and documentation are subject to confirmation against the specific requirement.

Contact Manan Steel & Metals

Website: https://manansteel.com/
Email: sales@manansteel.com
Phone: +91 98198 76962
Location: Girgaon, Mumbai, Maharashtra, India

For enquiries, visit the Manan Steel & Metals contact page.

Frequently Asked Questions About Alloy A286 Round Bar

1. What is the UNS number of Alloy A286?

The UNS designation for Alloy A286 is S66286. It is also known as Grade 660 and Werkstoff 1.4980.

2. Which ASTM standard covers Alloy A286 bars?

ASTM A638 covers heat-resisting alloy steel bars, forgings and forging stock. The required grade or type and supplementary requirements should be confirmed in the purchase order.

3. What is the difference between AMS 5731 and AMS 5732?

AMS 5731 covers the specified solution-treated A286 condition, while AMS 5732 covers the specified solution-treated and precipitation-aged condition. Buyers should verify the exact specification revision and requirements.

4. Is Alloy A286 available in round bar form?

Yes. A286 is produced in long-product forms including bars. Available diameters, lengths and conditions depend on the producer and supply source.

5. What information should I provide when requesting an A286 round bar quotation?

Provide the grade, diameter, length, quantity, applicable specification, heat-treatment condition, MTC requirements and delivery location.

6. Does Alloy A286 round bar come with a Material Test Certificate?

MTC availability and contents should be confirmed with the supplier. For critical applications, specify the required certificate and traceability documents in the purchase order.

7. Is A286 the same as Grade 660?

A286 is commonly designated Grade or Type 660 in several material specifications. However, buyers should confirm the exact standard and product requirements rather than treating every Grade 660 reference as automatically interchangeable.

8. Can A286 round bars be used for high-temperature fasteners?

Yes. A286 is used in selected high-temperature fastener applications. The required product specification, heat treatment and mechanical properties must match the component design.


SEO DETAILS

SEO Title: Alloy A286 Round Bar Sizes, ASTM Standards and MTC

Focus Keyword: Alloy A286 round bar

Secondary Keywords:

  • Alloy A286 bar sizes
  • ASTM A638 Grade 660
  • AMS 5731
  • AMS 5732
  • AMS 5737
  • UNS S66286 round bar
  • Alloy 660 round bar supplier
  • A286 Material Test Certificate
  • Alloy A286 supplier in India

URL Slug: alloy-a286-round-bar-sizes-astm-standards-mtc

Meta Description: Learn about Alloy A286 round bar sizes, ASTM A638, AMS specifications, heat-treatment conditions, MTC requirements and procurement in India.

Featured Image Filename: alloy-a286-round-bar-sizes-astm-standards.jpg

Featured Image Alt Text: Alloy A286 round bar UNS S66286 for industrial and aerospace applications

Featured Image Caption: Alloy A286 round bar procurement requires confirmation of dimensions, material condition, applicable standards and traceability documents.

INTERNAL LINKING CHECKLIST

PUBLISHING CHECKLIST

  • Use the article title as the only H1.
  • Include the focus keyword naturally in the title, introduction, SEO title and meta description.
  • Keep the ATI technical links as normal clickable outbound links.
  • Add the internal links in the relevant sections.
  • Add the featured image with the supplied alt text.
  • Link the enquiry CTA to the contact page.
  • Do not add unsupported claims about available sizes, stock or certifications.
  • Check that the published page has no broken links.
  • Avoid excessive repetition of the focus keyword.