Nitronic 60 Round Bar Supplier India for Anti-Galling Applications
Primary focus keyword: Nitronic 60 Round Bar Supplier India
URL slug:nitronic-60-round-bar-supplier-india
SEO title: Nitronic 60 Round Bar Supplier India for Valves, Pumps and Fasteners
Secondary focus keywords:
- Nitronic 60 Round Bar Supplier Mumbai
- Nitronic 60 Bar Manufacturer India
- UNS S21800 Round Bar
- Nitronic 60 Stainless Steel Round Bar
- Nitronic 60 Anti Galling Bar
- ASTM A276 Nitronic 60
- Nitronic 60 Valve Stem
- Nitronic 60 Pump Shaft
- Nitronic 60 Fasteners
- Nitronic 60 Industrial Bar
When metal components operate under pressure, repeated movement and direct metal-to-metal contact, galling can become a serious engineering problem. Valve stems, pump components, fasteners, shafts and other sliding or threaded parts may experience surface damage when conventional materials are exposed to severe friction and contact conditions.
This is one reason Nitronic 60 round bar is used for selected industrial components where anti-galling performance, strength and corrosion resistance are important.
Manan Steel & Metals supplies Nitronic 60 round bars in India for industrial and engineering requirements, including applications involving valves, pumps, fasteners, shafts, bushings and other machined components.
Table of Contents
- What Is Nitronic 60 Round Bar?
- Nitronic 60 Grade and Material Designation
- Why Nitronic 60 Is Used for Anti-Galling Applications
- Chemical Composition of Nitronic 60
- Mechanical Properties
- Industrial Applications of Nitronic 60 Round Bar
- Nitronic 60 for Valve and Pump Components
- Nitronic 60 for Industrial Fasteners
- Manufacturing and Machining Considerations
- What to Specify When Buying Nitronic 60 Round Bar
- Nitronic 60 Round Bar Supplier in India
- Frequently Asked Questions
- Request a Quote
What Is Nitronic 60 Round Bar?
Nitronic 60 round bar is an austenitic stainless steel developed for applications where resistance to galling and wear is an important consideration.
The material is commonly identified by the designation UNS S21800.
Unlike ordinary stainless steel selections where corrosion resistance may be the primary consideration, Nitronic 60 is particularly interesting when components also experience mechanical contact, sliding or repeated movement.
This makes the grade relevant to components such as:
- Valve stems
- Pump shafts
- Bushings
- Pins
- Bearings
- Fasteners
- Wear components
- Machined parts
- Industrial shafts
- Mechanical assemblies
For buyers looking for the material’s technical background, the Nickel Institute technical resources provide useful information about nickel-containing alloys and stainless steels.
Nitronic 60 Grade and Material Designation
The most important identification for Nitronic 60 is:
| Property | Nitronic 60 |
|---|---|
| Common Grade | Nitronic 60 |
| UNS | S21800 |
| Material Type | Austenitic stainless steel |
| Key Characteristic | High galling resistance |
| Major Alloying Elements | Chromium, nickel, manganese, silicon, nitrogen |
| Typical Applications | Valves, pumps, fasteners, wear components |
| Product Form | Round Bar / Rod and other forms |
When purchasing material for an engineered component, the purchaser should specify the required standard, dimensions, heat-treatment condition, finish and testing requirements along with the grade.
Do not rely only on the commercial name “Nitronic 60.” The complete purchase specification should match the engineering drawing or application requirement.
Why Is Nitronic 60 Used for Anti-Galling Applications?
Galling occurs when two metal surfaces come into contact under pressure and relative movement, causing localized adhesion and surface damage.
It can be particularly troublesome in:
- Threaded fasteners
- Valve stems
- Sliding components
- Pump components
- Mechanical assemblies
- Components exposed to repeated movement
Nitronic 60 has gained attention because of its strong resistance to galling in appropriate applications.
This can be valuable when replacing a conventional stainless steel component that repeatedly suffers from surface damage.
The material’s performance, however, depends on the complete application. Contact pressure, surface finish, lubrication, temperature, mating material, geometry and operating conditions can all affect galling behaviour.
For that reason, engineers should evaluate the actual service conditions rather than selecting a material based on galling resistance alone.
Chemical Composition of Nitronic 60
The alloying elements in Nitronic 60 contribute to its combination of corrosion resistance, strength and wear-related properties.
Typical composition ranges include:
| Element | Typical Composition |
|---|---|
| Chromium | Approx. 16–18% |
| Nickel | Approx. 8–9% |
| Manganese | Approx. 7–9% |
| Silicon | Approx. 3.5–4.5% |
| Nitrogen | Controlled alloying addition |
| Carbon | Low carbon content |
| Iron | Balance |
The exact chemical requirements should always be verified against the applicable material specification and the Mill Test Certificate (MTC) supplied with the material.
For engineering procurement, the actual heat analysis is more important than relying on a generic composition table found online.
Mechanical Properties of Nitronic 60 Round Bar
Nitronic 60 is known for a useful combination of mechanical strength and corrosion resistance.
Typical engineering data may include:
| Property | Typical / Reference Value |
|---|---|
| Tensile Strength | Around 690 MPa minimum, depending on condition/specification |
| Yield Strength | Around 380 MPa minimum, depending on condition/specification |
| Elongation | Typically around 35% |
| Material Type | Austenitic |
| Galling Resistance | High |
Mechanical properties can change according to product size, processing condition, heat treatment and applicable specification.
Therefore, buyers should always verify the required values against the actual product standard before approving material for a critical application.
Industrial Applications of Nitronic 60 Round Bar
The combination of strength, corrosion resistance and anti-galling performance makes Nitronic 60 relevant to several engineering applications.
Valve Components
Valve stems and other moving valve components can experience repeated contact and friction.
Nitronic 60 can be considered where galling resistance is an important design requirement.
Typical applications include:
- Valve stems
- Valve seats
- Valve hardware
- Pins
- Shafts
- Retaining components
The actual material selection depends on pressure, temperature, fluid chemistry and valve design.
Pump Components
Pump components can operate under demanding mechanical and corrosive conditions.
Nitronic 60 round bar may be machined into:
- Pump shafts
- Wear components
- Bushings
- Pins
- Mechanical components
The grade can be useful where the component requires both corrosion resistance and resistance to surface damage.
Industrial Fasteners
Threaded components are particularly vulnerable to galling because mating surfaces experience high contact pressure.
Nitronic 60 can therefore be considered for selected:
- Bolts
- Studs
- Nuts
- Threaded components
- Special fasteners
Correct thread design, surface condition and assembly practices remain important even when an anti-galling alloy is selected.
Bushings and Wear Components
Bushings and similar components may experience repeated movement against another metallic surface.
Nitronic 60’s wear and galling characteristics can make it suitable for selected mechanical components where dimensional stability and surface performance are important.
Shafts and Pins
Round bar can be machined into shafts, pins and other precision components.
The suitability of Nitronic 60 depends on the load, speed, mating material, environment and required dimensional tolerances.
Nitronic 60 for Valve and Pump Components
One of the strongest commercial opportunities for Nitronic 60 is application-specific procurement.
An engineer searching for:
“Nitronic 60 valve stem”
has a substantially different purchasing requirement from someone searching for:
“stainless steel round bar.”
That is why an industrial supplier needs to explain not only what the material is but where the material solves an actual engineering problem.
For valve manufacturers, pump manufacturers and maintenance departments, the important purchasing information can include:
- UNS designation
- Bar diameter
- Length
- Surface finish
- Mechanical properties
- Chemical composition
- MTC availability
- Machining allowance
- Quantity
- Delivery requirement
Providing these details in an enquiry can significantly reduce quotation delays.
Nitronic 60 for Industrial Fasteners
Fastener galling can create serious problems during installation and maintenance.
A threaded fastener may appear acceptable during normal inspection but become damaged during tightening or removal.
This is particularly important in applications where:
- Fasteners are frequently removed
- Components operate at elevated loads
- Stainless materials are used
- Threads are exposed to corrosive environments
- Maintenance access is difficult
- Component failure can interrupt production
Nitronic 60 may be considered for specific fastener applications where galling resistance is required.
However, the correct combination of material, thread geometry, surface condition, lubrication and installation procedure should be established by the responsible engineering team.
Manufacturing and Machining Considerations
Nitronic 60 is an engineering alloy rather than a simple commodity steel.
Machining parameters should therefore be selected appropriately for the material condition, machine setup, tooling and component geometry.
When ordering round bar for machining, provide:
- Finished component diameter
- Required raw-bar diameter
- Cut length
- Quantity
- Machining allowance
- Surface finish
- Straightness requirements
- Heat-treatment requirements
- Inspection requirements
If the component will be precision machined, buying the correct starting size can help reduce unnecessary material removal and machining time.
What to Specify When Buying Nitronic 60 Round Bar
If you are requesting a quotation for Nitronic 60 round bar, include the following information:
Grade: Nitronic 60 / UNS S21800
Diameter: Required diameter in mm
Length: Standard or cut-to-length
Quantity: Kg / pieces
Finish: Bright, polished, ground or required finish
Standard: Required ASTM or purchaser specification
Testing: MTC, inspection or additional testing requirements
Application: Valve, pump, fastener, shaft, bushing or other component
Delivery: Mumbai / Maharashtra / India / export destination
This allows the supplier to understand the requirement before preparing the quotation.
Nitronic 60 Round Bar Supplier in India
Manan Steel & Metals supplies specialty stainless steel and alloy products to industrial buyers.
For customers searching for a Nitronic 60 Round Bar Supplier in India, the company can review requirements based on grade, diameter, quantity, finish and application.
The company supplies industrial materials for applications where standard commodity grades may not meet the required engineering specification.
For the product range, visit the Manan Steel & Metals Nitronic 60 product page.
Buyers can also review the company’s wider range of stainless steel and specialty alloy products through the Manan Steel & Metals website.
Frequently Asked Questions
What is the UNS number of Nitronic 60?
Nitronic 60 is commonly identified as UNS S21800.
What is Nitronic 60 used for?
Nitronic 60 is used for selected applications requiring high resistance to galling, wear and corrosion. Applications can include valve components, pump components, fasteners, shafts, bushings and other mechanical parts.
Is Nitronic 60 suitable for valve stems?
Nitronic 60 can be considered for valve stems where anti-galling performance and corrosion resistance are required. Final material selection should consider the valve’s pressure, temperature, fluid and operating conditions.
Is Nitronic 60 suitable for fasteners?
Yes, Nitronic 60 can be used for selected industrial fastener applications where galling resistance is important. The complete fastener design and installation conditions should be evaluated.
Can Nitronic 60 be machined?
Yes. Nitronic 60 can be machined, although machining parameters should be selected for the alloy and its supplied condition.
Where can I buy Nitronic 60 round bar in India?
Industrial buyers can contact Manan Steel & Metals in Mumbai, India with the required diameter, length, quantity, specification and delivery location.
Request a Quote for Nitronic 60 Round Bar
Looking for a Nitronic 60 Round Bar Supplier in India?
Send your requirement to Manan Steel & Metals with:
Grade: Nitronic 60 / UNS S21800
Diameter: ______ mm
Length: ______ mm
Quantity: ______ kg / pieces
Standard: ______
Finish: ______
Application: ______
Delivery Location: ______
Manan Steel & Metals
Shop No. 2, Hira Building
97 Khetwadi Main Road (Nanubhai Desai Road)
Girgaon, Mumbai – 400004
Maharashtra, India
Phone: +91 98198 76962
Email: sales@manansteel.com
For a quotation, contact Manan Steel & Metals with your complete material requirement so availability and supply options can be checked.
Nickel Institute technical resources → https://nickelinstitute.org/
Manan Steel & Metals Nitronic 60 product page → your Nitronic 60 page
Manan Steel & Metals website → https://manansteel.com/