Alloy A286 Round Bar Sizes
Alloy A286 round bar is used in engineering and industrial applications that require high strength, oxidation resistance and reliable performance at elevated temperatures. This age-hardenable iron-nickel-chromium alloy is commonly identified as UNS S66286, Grade 660 and Werkstoff 1.4980.
It is selected for applications such as aerospace fasteners, gas-turbine components, high-temperature bolts, studs and specialised industrial parts.
For buyers, choosing the correct Alloy A286 round bar involves more than confirming the grade. Diameter, length, material condition, applicable ASTM or AMS specification, testing requirements and material traceability must all be considered.
This guide explains the important procurement points for purchasing Alloy A286 round bars in India.
Table of Contents
ToggleAlloy A286 is a precipitation-hardening austenitic iron-based superalloy containing nickel, chromium, titanium and molybdenum.
Its strength can be increased through controlled solution treatment and precipitation ageing. The alloy is used in selected applications requiring a combination of high mechanical strength, oxidation resistance and performance at elevated temperatures.
A286 is also known by these designations:
Buyers should confirm the exact designation and governing specification rather than relying only on a trade name.
Alloy A286 round bars are used as raw material for machining and manufacturing precision components.
The required size depends on the finished component, machining allowance and applicable product specification.
Common dimensional details to specify include:
| Parameter | What the buyer should confirm |
|---|---|
| Diameter | Required nominal diameter in mm or inches |
| Length | Required standard or cut length |
| Tolerance | Permissible dimensional variation |
| Surface condition | As supplied, machined or another specified finish |
| Straightness | Required straightness for the application |
| Quantity | Number of pieces or total weight |
| Material condition | Solution treated, aged or another specified condition |
Buyers may enquire for small, medium or large diameter A286 round bars depending on their manufacturing requirements.
There is no single universal size range that applies to every producer or specification. Available diameters, lengths and tolerances should be confirmed with the supplier.
For accurate procurement, provide the required diameter and length rather than relying on a general size chart.
The approximate theoretical weight of a round bar can be calculated using:
Weight (kg) = D² × L × 0.00623
Where:
For example, a theoretical 25 mm diameter bar with a length of 1 metre weighs approximately:
25 × 25 × 1 × 0.00623 = 3.89 kg
Actual supplied weight can vary due to dimensional tolerances and material density.
For additional calculations, refer to the Manan Steel & Metals round bar weight chart.
Selecting the correct material specification is one of the most important steps when purchasing A286.
Different standards cover different product forms and requirements. A specification for sheet or plate should not automatically be used for round bars.
Common references include:
| Standard | General scope |
|---|---|
| ASTM A638 | Heat-resisting alloy steel bars, forgings and forging stock |
| AMS 5731 | A286 bars, forgings, tubing and rings in the specified solution-treated condition |
| AMS 5732 | A286 bars, forgings, tubing and rings in the specified solution-treated and aged condition |
| AMS 5734 | A286 long-product forms in the specified 1650°F solution-treated condition |
| AMS 5737 | A286 long-product forms in the specified 1650°F solution-treated and aged condition |
| ASTM A453 Grade 660 | High-temperature bolting materials |
ASTM A638 covers heat-resisting alloy steel bars, forgings and forging stock intended for high-temperature service.
When ordering A286 under ASTM A638, buyers should identify the required grade or type and applicable supplementary requirements.
The purchase order should clearly state the required standard and product form.
These specifications are relevant to A286 long-product forms, including bars.
The distinction between solution-treated and aged conditions is important:
These specifications cover corresponding A286 product conditions using the specified 1650°F solution-treatment route:
The required specification must match the engineering drawing or purchase order.
For technical details, refer to the ATI A286 specification and product information.
A286 is an age-hardenable alloy. Its mechanical properties depend significantly on the heat-treatment condition.
The two broad conditions buyers commonly need to distinguish are:
In this condition, the material has undergone solution heat treatment and is generally more suitable for subsequent fabrication and machining than the aged condition.
The exact mechanical properties must be checked against the applicable specification.
The material undergoes precipitation ageing after solution treatment to develop higher strength and hardness.
This condition is used where the component requires the mechanical properties specified by the relevant standard.
The correct condition depends on the component’s intended use.
Before placing an order, confirm:
Do not assume that all A286 round bars are supplied in the same condition or have identical mechanical properties.
A Material Test Certificate (MTC) is an important document for verifying the identity and tested properties of supplied material.
For critical industrial and engineering applications, buyers should request an MTC that corresponds to the actual material supplied.
An A286 MTC may include the following information, depending on the purchase specification:
The heat number connects the supplied material to its production and test records.
It helps buyers and quality-control teams verify that the documentation corresponds to the actual material received.
The heat number on the material identification and the certificate should be checked for consistency.
Before accepting the material, check:
An MTC should not be accepted solely because it mentions A286. The certificate must satisfy the actual purchase requirements.
A286 contains several alloying elements that contribute to its strength, oxidation resistance and high-temperature characteristics.
The following table gives commonly published composition limits. The exact limits must be checked against the applicable material specification and its revision.
| Element | Composition by weight |
|---|---|
| Nickel (Ni) | 24.0–27.0% |
| Chromium (Cr) | 13.5–16.0% |
| Titanium (Ti) | 1.90–2.35% |
| Molybdenum (Mo) | 1.0–1.5% |
| Vanadium (V) | 0.10–0.50% |
| Manganese (Mn) | 2.0% max |
| Silicon (Si) | 1.0% max |
| Aluminium (Al) | 0.35% max |
| Carbon (C) | 0.08% max |
| Iron (Fe) | Balance |
The composition table is useful for preliminary grade identification, but the governing specification and MTC determine whether a particular heat complies.
Mechanical properties are especially important when A286 is used for high-strength fasteners, turbine hardware and precision-engineered components.
Depending on the specified condition and product form, the purchase specification may require testing for:
For example, ATI publishes mechanical-property information for A286 sheet and plate under AMS 5525. Those figures must not automatically be applied to round bars.
Important: Mechanical-property limits for A286 bars must be taken from the exact bar specification, grade or type, heat-treatment condition and applicable revision.
Refer to the ATI A286 technical data sheet for product-form-specific technical information.
A286 round bars are used as raw material for machining components where high strength and elevated-temperature performance are required.
Common application areas include:
The final component design and operating conditions determine whether A286 is suitable.
Choosing the right supplier is important for maintaining material traceability and meeting purchase requirements.
Before finalising an order, buyers should evaluate the following:
1. Grade confirmation: Ensure the supplier can confirm the required A286 or UNS S66286 designation.
2. Specification: Clearly state ASTM A638, the relevant AMS specification or another approved requirement.
3. Dimensions: Specify diameter, length, tolerances and quantity.
4. Material condition: Confirm whether solution-treated or solution-treated and aged material is required.
5. Documentation: Ask for the MTC and any additional inspection documents required.
6. Traceability: Check heat-number identification and certificate matching.
7. Delivery requirements: Confirm delivery location, packing and dispatch expectations.
8. Technical clarification: Resolve any uncertainty about specification, testing or condition before issuing the purchase order.
Manan Steel & Metals deals in specialty steel and alloy products for industrial and engineering requirements.
Established in 2007, the company caters to buyers looking for specialty grades used in precision machining, manufacturing and specialised industrial applications.
For an enquiry regarding Alloy A286 round bar, share your exact requirements so that the grade, dimensions and documentation can be checked.
Details to include in your enquiry:
Availability, dimensions, material condition and documentation are subject to confirmation against the specific requirement.
Contact Manan Steel & Metals
Website: https://manansteel.com/
Email: sales@manansteel.com
Phone: +91 98198 76962
Location: Girgaon, Mumbai, Maharashtra, India
For enquiries, visit the Manan Steel & Metals contact page.
The UNS designation for Alloy A286 is S66286. It is also known as Grade 660 and Werkstoff 1.4980.
ASTM A638 covers heat-resisting alloy steel bars, forgings and forging stock. The required grade or type and supplementary requirements should be confirmed in the purchase order.
AMS 5731 covers the specified solution-treated A286 condition, while AMS 5732 covers the specified solution-treated and precipitation-aged condition. Buyers should verify the exact specification revision and requirements.
Yes. A286 is produced in long-product forms including bars. Available diameters, lengths and conditions depend on the producer and supply source.
Provide the grade, diameter, length, quantity, applicable specification, heat-treatment condition, MTC requirements and delivery location.
MTC availability and contents should be confirmed with the supplier. For critical applications, specify the required certificate and traceability documents in the purchase order.
A286 is commonly designated Grade or Type 660 in several material specifications. However, buyers should confirm the exact standard and product requirements rather than treating every Grade 660 reference as automatically interchangeable.
Yes. A286 is used in selected high-temperature fastener applications. The required product specification, heat treatment and mechanical properties must match the component design.
SEO Title: Alloy A286 Round Bar Sizes, ASTM Standards and MTC
Focus Keyword: Alloy A286 round bar
Secondary Keywords:
URL Slug: alloy-a286-round-bar-sizes-astm-standards-mtc
Meta Description: Learn about Alloy A286 round bar sizes, ASTM A638, AMS specifications, heat-treatment conditions, MTC requirements and procurement in India.
Featured Image Filename: alloy-a286-round-bar-sizes-astm-standards.jpg
Featured Image Alt Text: Alloy A286 round bar UNS S66286 for industrial and aerospace applications
Featured Image Caption: Alloy A286 round bar procurement requires confirmation of dimensions, material condition, applicable standards and traceability documents.