Alloy A286 Chemical Composition, Mechanical Properties and Heat Treatment

Alloy A286 Chemical Composition

Alloy A286 is an age-hardenable iron-nickel-chromium alloy developed for engineering applications requiring high mechanical strength, oxidation resistance and dependable performance at elevated temperatures. Identified by UNS S66286, it is used in aerospace components, gas turbines, high-temperature fasteners and specialised industrial equipment.

One of the most important characteristics of A286 is its ability to develop higher strength through controlled solution treatment and precipitation ageing. Its final mechanical properties depend on the chemical composition, product form, heat-treatment cycle and applicable material specification.

For engineers and industrial buyers, understanding the chemical composition, tensile strength, yield strength, hardness and heat-treatment condition is essential when selecting Alloy A286.

1. Alloy A286 Chemical Composition

A286 is an iron-based, austenitic precipitation-hardening alloy. Its composition includes nickel, chromium, titanium and molybdenum, with smaller controlled additions of elements such as vanadium, boron and aluminium.

The combination of these elements contributes to its strength, oxidation resistance and high-temperature performance.

Typical chemical composition of Alloy A286

ElementComposition by weight (%)
Nickel (Ni)24.00–27.00
Chromium (Cr)13.50–16.00
Titanium (Ti)1.90–2.35
Molybdenum (Mo)1.00–1.50
Vanadium (V)0.10–0.50
Manganese (Mn)2.00 maximum
Silicon (Si)1.00 maximum
Aluminium (Al)0.35 maximum
Carbon (C)0.08 maximum
Cobalt (Co)1.00 maximum
Phosphorus (P)0.025 maximum
Sulphur (S)0.015 maximum
Boron (B)0.003–0.010
Iron (Fe)Balance

These are composition limits published in ATI’s technical information. The governing product specification and its applicable edition must be checked before accepting a material. The limits may differ between specifications or product requirements.

Role of alloying elements in A286

Nickel (Ni)

Nickel helps maintain the austenitic structure and contributes to the alloy’s mechanical properties and performance at elevated temperatures.

Chromium (Cr)

Chromium contributes to oxidation resistance by supporting the formation of a protective oxide layer on the material surface.

Titanium (Ti)

Titanium is an important strengthening addition. It participates in the precipitation-hardening mechanism that helps A286 achieve higher strength after ageing.

Molybdenum (Mo)

Molybdenum contributes to the alloy’s strength and high-temperature mechanical performance.

Vanadium (V)

Vanadium is a controlled alloying addition that contributes to the material’s metallurgical characteristics.

Boron (B)

Boron is present in a small controlled amount and contributes to the alloy’s grain-boundary and high-temperature properties.

2. How Precipitation Hardening Works in Alloy A286

A286 is strengthened through precipitation hardening, also known as age hardening.

The process involves two important stages:

  1. Solution treatment.
  2. Controlled ageing or precipitation heat treatment.

During solution treatment, the material is heated to a specified temperature so that the alloying elements required for strengthening are brought into solid solution.

The material is then cooled according to the applicable procedure. Subsequent ageing allows strengthening precipitates to develop within the alloy’s microstructure.

These precipitates restrict dislocation movement and increase the material’s strength and hardness.

The exact heat-treatment procedure depends on the ordered specification and the required properties.

3. Alloy A286 Mechanical Properties

Mechanical properties are among the most important factors when selecting A286 for high-strength engineering applications.

The material’s tensile strength, yield strength, elongation and hardness vary according to its product form and heat-treatment condition.

For example, ATI’s published product information for precipitation-heat-treated sheet and plate under AMS 5525 lists the following minimum mechanical properties:

PropertyPublished requirement
Tensile strength965 MPa minimum
Yield strength655 MPa minimum
Elongation15% minimum
Hardness24–35 HRC

Important: These values refer to the specified sheet and plate product requirements. They must not automatically be applied to every A286 round bar. Bar properties should be checked against the applicable bar specification, such as the relevant AMS 5731, 5732, 5734 or 5737 requirement.

Tensile strength

Tensile strength indicates the maximum stress a material can withstand while being stretched before fracture.

A286 is used in components requiring high tensile strength, particularly after the specified precipitation-hardening treatment.

Yield strength

Yield strength indicates the stress at which permanent deformation begins under the defined test conditions.

It is an important design consideration for fasteners, shafts, turbine components and other load-bearing parts.

Elongation

Elongation measures the material’s ability to deform plastically before fracture.

The required elongation depends on the product specification, material condition and test requirements.

Hardness

Hardness indicates resistance to local indentation or surface deformation.

A286 hardness increases after suitable precipitation ageing. The required hardness range should always be checked against the applicable product specification and heat-treatment condition.

4. Alloy A286 Heat Treatment Process

Heat treatment is central to achieving the required properties of A286.

The two principal stages are solution treatment and precipitation ageing.

Stage 1: Solution treatment

ATI’s technical data describes two solution-treatment routes for A286:

Solution-treatment routeTemperatureHolding time
Lower-temperature route899°C (1650°F)2 hours
Higher-temperature route982°C (1800°F)1 hour

The appropriate cooling method and process details must follow the governing material specification and approved heat-treatment procedure.

The choice between these routes depends on the required balance of mechanical properties, ductility and high-temperature performance.

Stage 2: Precipitation ageing

After solution treatment, the material is aged to develop the required strength.

ATI’s technical data identifies an ageing range of:

  • Temperature: 704–760°C (1300–1400°F)
  • Holding time: 16 hours
  • Cooling: Air cooling

The exact cycle must be selected according to the applicable specification and product condition. The time, temperature and cooling requirements should not be changed without engineering approval.

Why are different heat-treatment routes used?

Different solution-treatment routes are specified because the resulting properties can vary.

For example, ATI describes the 1650°F and 1800°F solution-treatment routes in relation to different combinations of tensile, yield, creep and stress-rupture performance.

The correct route should therefore be selected according to the application and the governing specification, rather than assuming that one heat-treatment cycle is suitable for every A286 component.

5. Alloy A286 Hardness Before and After Ageing

Hardness is influenced by the material’s condition and the precipitation-hardening process.

ATI’s technical information provides the following reference ranges:

Material conditionBrinell hardness
Solution treatedApproximately 140–180 HB
After ageingApproximately 248–321 HB

These are reference values from the cited technical information. Actual acceptance requirements depend on the product specification, heat-treatment route and ordered condition.

For industrial procurement, the buyer should specify the required hardness test method and acceptance range where hardness is a contractual requirement.

6. High-Temperature Mechanical Performance of A286

A286 is used in applications where mechanical strength must be maintained at elevated temperatures.

ATI identifies applications requiring high strength and corrosion resistance up to approximately 704°C (1300°F).

The alloy is also used in certain cryogenic applications.

However, mechanical properties change with temperature. Tensile strength, yield strength, creep resistance and stress-rupture performance must be evaluated at the actual service temperature.

When specifying A286 for high-temperature equipment, engineers should consider:

  • Operating temperature
  • Applied mechanical load
  • Duration of exposure
  • Thermal cycling
  • Stress-rupture requirements
  • Component geometry
  • Applicable design code

Room-temperature tensile properties alone are not sufficient to establish suitability for a high-temperature component.

7. Oxidation and Corrosion Resistance

A286 combines useful oxidation resistance with corrosion performance in selected industrial environments.

Its chromium content contributes to oxidation resistance at elevated temperatures, while its nickel content supports its austenitic alloy structure.

ATI reports oxidation resistance up to approximately 982°C (1800°F) under specified test and exposure conditions.

This should not be confused with a universal recommended continuous service temperature. Oxidation performance and mechanical strength are different considerations.

For component selection, the following factors should be evaluated:

  • Atmospheric composition
  • Operating temperature
  • Exposure duration
  • Chemical concentration
  • Chloride exposure
  • Mechanical loading
  • Surface condition

The alloy should be approved for the actual service environment before being selected for critical equipment.

8. A286 Material Specifications and Heat-Treatment Conditions

A286 is supplied under different specifications depending on its product form and required condition.

Examples of relevant AMS specifications include:

SpecificationGeneral product scope or condition
AMS 5731Bars, rings, forgings and tubing – 1800°F solution treatment
AMS 5732Bars, rings, forgings and tubing – 1800°F solution treatment and ageing
AMS 5734Bars, rings, forgings and tubing – 1650°F solution treatment
AMS 5737Bars, rings, forgings and tubing – 1650°F solution treatment and ageing
AMS 5525Sheet, strip and plate
ASTM A638Precipitation-hardening iron-base superalloy bars, forgings and forging stock

The specification must match the ordered product form. For example, sheet and plate requirements should not be used as a substitute for bar requirements.

Refer to the ATI A286 Technical Data Sheet and ATI A286 Product Information for manufacturer-published information.

9. What Buyers Should Check in an A286 Material Test Certificate

A Material Test Certificate (MTC) provides important information for verifying the supplied material against the purchase order.

For A286 round bars, buyers should review:

  1. Material designation: A286 / UNS S66286.
  2. Applicable AMS or ASTM specification.
  3. Heat number and traceability.
  4. Chemical composition test results.
  5. Mechanical test results.
  6. Heat-treatment condition.
  7. Hardness results, where specified.
  8. Product dimensions and identification.
  9. Additional inspection results, where ordered.

The certificate should be checked against the actual specification and the ordered material condition.

If the component requires a specific aged condition, confirm that the supplied documentation demonstrates compliance with that requirement.

10. Why Chemical Composition and Heat Treatment Matter When Buying A286

Two materials carrying the same A286 grade designation may have different mechanical properties if they are supplied under different specifications or heat-treatment conditions.

This is why buyers should avoid selecting A286 based only on the grade name.

Before placing an order, confirm:

  • Exact grade and UNS designation.
  • Product specification and edition.
  • Required diameter and length.
  • Required heat-treatment condition.
  • Mechanical-property requirements.
  • Hardness acceptance range.
  • Material test certificate requirements.
  • Any additional testing or inspection.

These details help prevent misunderstandings between the buyer, supplier and end user.

11. Alloy A286 Round Bar Supplier – Manan Steel & Metals

Manan Steel & Metals, established in 2007, deals in specialty metals and alloy products for industrial requirements.

The product range includes Alloy A286 and other specialty materials such as Inconel, Monel, Invar, Titanium, Nitronic and engineering alloys.

For Alloy A286 round bar enquiries, buyers can share the required diameter, length, quantity, specification and heat-treatment condition.

Material documentation and availability requirements can be reviewed against the enquiry.

Contact Manan Steel & Metals

For product enquiries, visit the Manan Steel & Metals Contact Page.

Frequently Asked Questions

1. What is the chemical composition of Alloy A286?

A286 contains approximately 24–27% nickel, 13.5–16% chromium, 1.9–2.35% titanium and 1–1.5% molybdenum, with iron as the balance. The exact limits must be checked against the applicable product specification.

2. Is Alloy A286 precipitation hardenable?

Yes. A286 is an age-hardenable alloy. Its strength is increased through solution treatment followed by controlled precipitation ageing.

3. What is the heat-treatment temperature for A286?

ATI describes solution-treatment routes at approximately 899°C (1650°F) and 982°C (1800°F), followed by ageing in the range of approximately 704–760°C (1300–1400°F). The selected cycle must follow the ordered specification.

4. What is the tensile strength of A286?

The tensile strength depends on product form and heat-treatment condition. ATI lists a minimum tensile strength of 965 MPa for certain precipitation-heat-treated sheet and plate requirements under AMS 5525. Bar requirements must be checked against the applicable bar specification.

5. What is the hardness of A286 after ageing?

ATI’s technical information gives an approximate aged hardness range of 248–321 HB for the described heat-treatment condition. The actual acceptance range depends on the governing specification.

6. What is the difference between solution-treated and aged A286?

Solution-treated A286 has undergone the solution-treatment stage. Aged A286 has also undergone precipitation heat treatment to develop higher strength and hardness.

7. Which elements make A286 age hardenable?

Titanium is a key strengthening addition. It participates in the precipitation-hardening mechanism that develops higher strength after the specified heat-treatment process.

8. Is A286 suitable for high-temperature applications?

Yes. A286 is used in selected high-temperature applications requiring mechanical strength and oxidation resistance. Actual suitability depends on the operating temperature, loading, exposure duration and design requirements.

Conclusion

Alloy A286 is a specialised engineering alloy whose performance depends on both its chemical composition and heat-treatment condition.

Nickel, chromium, titanium and molybdenum contribute to its material characteristics, while controlled solution treatment and precipitation ageing help develop the required strength and hardness.

For industrial buyers, verifying the product specification, material condition, mechanical test results and MTC is essential before purchasing A286 round bars.

For Alloy A286 round bar requirements, contact Manan Steel & Metals with your required dimensions, quantity and specification details.


SEO DETAILS

SEO Title: Alloy A286 Chemical Composition, Properties & Heat Treatment

Focus Keyword: Alloy A286 chemical composition

Secondary Keywords:

  • A286 mechanical properties
  • Alloy A286 heat treatment
  • A286 chemical composition
  • UNS S66286 properties
  • A286 tensile strength
  • A286 yield strength
  • A286 hardness
  • A286 precipitation hardening
  • A286 solution treatment
  • A286 aged condition
  • Incoloy A286 properties

URL Slug: alloy-a286-chemical-composition-mechanical-properties-heat-treatment

Meta Description: Learn Alloy A286 chemical composition, mechanical properties, hardness and solution treatment and ageing requirements for industrial applications.

Featured Image Filename: alloy-a286-chemical-composition-heat-treatment.jpg

Featured Image Alt Text: Alloy A286 UNS S66286 chemical composition and heat treatment

Featured Image Caption: Alloy A286 composition and precipitation-hardening process for high-strength engineering applications.

Internal Links Included:

External Follow Links Included:

Publishing Checklist:

  • Keep only one H1 heading.
  • Use the focus keyword naturally in the SEO title, introduction, at least one H2 and meta description.
  • Keep both external links clickable inside the article body.
  • Do not mark external links as nofollow.
  • Keep internal links clickable.
  • Add the featured image using the supplied alt text.
  • Do not apply sheet and plate mechanical-property figures to round bars without checking the bar specification.
  • Do not present typical hardness values as guaranteed acceptance limits.
  • Avoid keyword stuffing.
  • Recheck Rank Math after publishing; the final score depends on the live page and plugin settings.