Titanium Grade 5 Round Bar
Titanium Grade 5 round bar is a high-strength titanium alloy used in applications where a combination of low weight, mechanical strength and corrosion resistance is important. Also identified as Ti-6Al-4V, Ti-6-4, Ti64 and UNS R56400, this alloy is widely specified for demanding aerospace, marine, oil and gas, automotive and industrial engineering components.
For buyers, selecting the correct Titanium Grade 5 round bar involves more than confirming the grade name. The product specification, diameter, supply condition, dimensional tolerance, test requirements and material documentation must all match the component’s engineering requirements.
Manan Steel & Metals supplies specialty steel and alloy materials, including titanium grades. Buyers can contact the team with their required grade, dimensions and quantity for an enquiry.
Table of Contents
ToggleTitanium Grade 5 is an alpha-beta titanium alloy containing aluminium and vanadium as its principal alloying elements. Its recognised designation is Ti-6Al-4V, referring to approximately 6% aluminium and 4% vanadium, with titanium forming the balance.
The alloy is valued for its high strength-to-weight ratio and corrosion resistance in many environments. Compared with commercially pure titanium grades, Grade 5 offers higher mechanical strength, making it suitable for components exposed to demanding loads.
Common material designations include:
These designations are useful when searching for material, but the buyer should always confirm the governing standard and product form before placing an order.
The chemical composition of Titanium Grade 5 is controlled by the applicable material specification. Aluminium and vanadium are the principal alloying elements, while limits on oxygen, nitrogen, carbon, hydrogen and iron help control material quality and performance.
Typical composition limits commonly associated with Ti-6Al-4V include:
| Element | Typical specification range or limit |
|---|---|
| Aluminium (Al) | 5.50–6.75% |
| Vanadium (V) | 3.50–4.50% |
| Iron (Fe) | Maximum depends on specification |
| Oxygen (O) | Maximum 0.20% |
| Carbon (C) | Maximum 0.08% |
| Nitrogen (N) | Maximum 0.05% |
| Hydrogen (H) | Maximum depends on specification |
| Titanium (Ti) | Balance |
These values are a general reference, not a substitute for the governing standard. The buyer should check the exact chemistry limits and the material test certificate for the ordered product.
Titanium Grade 5 is selected when a component needs substantial mechanical strength without the weight associated with many conventional engineering metals.
One of the main reasons engineers specify Ti-6Al-4V is its ability to provide high strength at a relatively low density. This makes it useful in weight-sensitive structural and rotating components.
Titanium Grade 5 forms a protective oxide film on its surface. This contributes to its corrosion resistance in many environments, although performance must be assessed against the actual chemicals, temperature, concentration and service conditions.
Grade 5 offers significantly higher strength than commercially pure titanium grades. Actual tensile strength, yield strength and elongation depend on the product specification, dimensions and supply condition.
As an alpha-beta alloy, Ti-6Al-4V can be supplied in different conditions, including annealed and solution-treated-and-aged conditions where permitted by the relevant specification. Heat treatment must be selected according to the component’s engineering requirements.
Titanium Grade 5 requires appropriate tooling, cutting conditions and heat management during machining. Its low thermal conductivity can cause heat to concentrate near the cutting zone, making machining practice important.
The applicable standard depends on the product form and required condition. Buyers should avoid assuming that every titanium specification covers every product form.
Commonly referenced specifications include:
| Standard | Typical product coverage |
|---|---|
| ASTM B348 | Titanium and titanium alloy bars and billets |
| ASTM B265 | Titanium and titanium alloy sheet, strip and plate |
| AMS 4928 | Titanium alloy bars, forgings and forging stock in the specified condition |
| AMS 4965 | Titanium alloy bars and forgings in solution-treated-and-aged condition, subject to specification scope |
The latest applicable revision and exact grade requirements should be confirmed before procurement. For aerospace or other controlled applications, the purchaser should state the required specification, condition and acceptance criteria clearly.
For technical reference, consult the ATI Ti-6Al-4V Grade 5 technical data sheet and the Titanium Industries AMS 4928 specification guide.
Titanium Grade 5 round bars are used to manufacture components where strength, weight reduction and resistance to demanding operating environments are important.
The alloy is used in selected aircraft structural parts, engine components, fasteners and other weight-sensitive engineering applications. Material selection must follow the relevant aerospace specification and approval requirements.
Its corrosion resistance and mechanical strength make Grade 5 relevant to selected marine and offshore components. Suitability depends on the actual seawater exposure, crevice conditions, loading and design requirements.
Titanium alloys may be specified for selected components in demanding oil and gas environments. Buyers should provide the service conditions and any applicable project or industry requirements when requesting material.
High-performance engineering applications can use Ti-6Al-4V where reducing component weight while retaining strength is a priority.
Grade 5 round bars can be machined into shafts, fittings, fasteners and other precision-engineered components, subject to the design and service requirements.
Before purchasing Titanium Grade 5 round bar, check the following details:
A complete enquiry helps the supplier assess the requirement accurately and reduces the risk of receiving a quotation for a different product condition or specification.
For industrial procurement, material traceability is an important part of the buying process. Buyers should specify the documentation required before confirming the order.
Depending on the application and purchase specification, the documentation may include:
Do not assume that every order automatically includes the same certificate or inspection scope. Confirm the documentation requirements with the supplier before placing the purchase order.
A suitable supplier should understand the difference between titanium grades, product forms and material specifications. A clear enquiry process helps buyers confirm whether the offered material matches the required engineering specification.
When sourcing Titanium Grade 5 round bars, buyers should look for:
Manan Steel & Metals deals in specialty metals and alloy materials. Buyers looking for Titanium Grade 5 round bars can share their requirements for a quotation and availability confirmation.
Looking for Titanium Grade 5 round bars for aerospace, marine, offshore, automotive or industrial engineering applications?
Contact Manan Steel & Metals with your required diameter, length, quantity and material specification.
Email: sales@manansteel.com
Phone: +91 98198 76962
Website: https://manansteel.com/
Enquiry: Contact Manan Steel & Metals
Share your material requirement to discuss the suitable grade, specification and supply options.
SEO Title: Titanium Grade 5 Round Bar | Ti-6Al-4V Supplier
Focus Keyword: Titanium Grade 5 round bar
Secondary Keywords:
URL Slug: titanium-grade-5-round-bar-properties-specifications-guide
Meta Description: Looking for Titanium Grade 5 round bar? Explore Ti-6Al-4V properties, UNS R56400, ASTM B348, AMS 4928 and industrial applications.
Featured Image Filename: titanium-grade-5-ti-6al-4v-round-bar.jpg
Image Alt Text: Titanium Grade 5 Ti-6Al-4V round bar UNS R56400
Image Caption: Titanium Grade 5 (Ti-6Al-4V) round bar for industrial and engineering applications.
Internal Links:
External Authority Links: