Table of Contents
ToggleInconel 625, also known as Alloy 625, UNS N06625 and W.Nr. 2.4856, is a nickel-based alloy valued for its corrosion resistance, strength and performance in demanding industrial environments. Its combination of nickel, chromium, molybdenum and niobium makes it suitable for selected marine, chemical processing, aerospace and high-performance engineering applications.
For engineers, procurement teams and material buyers, understanding the chemical composition and mechanical properties of Inconel 625 is essential when specifying round bars and other product forms.
Manan Steel & Metals supports industrial enquiries for specialty metals. Buyers can submit their required grade, dimensions, applicable standard and documentation requirements for an availability review.
Inconel 625 derives its properties from a carefully balanced combination of alloying elements. Nickel forms the base of the alloy, while chromium, molybdenum and niobium contribute to its corrosion resistance and strengthening characteristics.
The following table provides a general reference to the nominal composition limits commonly associated with UNS N06625. Always verify the applicable product specification and revision before using these values for material acceptance.
| Element | Typical specification limit, weight % |
|---|---|
| Nickel (Ni) | 58.0 minimum |
| Chromium (Cr) | 20.0–23.0 |
| Molybdenum (Mo) | 8.0–10.0 |
| Niobium + Tantalum (Nb + Ta) | 3.15–4.15 |
| Iron (Fe) | 5.0 maximum |
| Cobalt (Co) | 1.0 maximum |
| Manganese (Mn) | 0.50 maximum |
| Silicon (Si) | 0.50 maximum |
| Carbon (C) | 0.10 maximum |
| Aluminium (Al) | 0.40 maximum |
| Titanium (Ti) | 0.40 maximum |
| Phosphorus (P) | 0.015 maximum |
| Sulphur (S) | 0.015 maximum |
These are general reference limits, not a substitute for the governing material standard. The precise requirements can depend on the applicable specification and product form.
For additional alloy information, consult Special Metals, a technical resource for nickel-based alloys.
Nickel is the principal constituent of Inconel 625. It contributes to the alloy’s overall stability and corrosion performance in many demanding service environments.
Chromium supports the formation of a protective surface oxide, contributing to resistance against oxidation and corrosion in appropriate environments.
Molybdenum improves resistance to certain forms of localised corrosion, including pitting and crevice corrosion, depending on the service environment.
Niobium contributes to strengthening through its interaction with the alloy’s microstructure. Its role is important to the mechanical performance of Inconel 625.
Iron is present as a constituent of the alloy within the applicable specification limits. Its permitted concentration must be verified against the relevant standard.
The mechanical properties of Inconel 625 depend on the product form, material condition, manufacturing route, heat treatment and applicable specification. Therefore, buyers should not assume that a single set of values applies to every round bar or finished component.
Important properties to review include:
When purchasing Inconel 625 round bars, ask for mechanical test results that correspond to the supplied material condition and the required product specification.
For standards information, visit ASTM International and verify the applicable requirements for the product being purchased.
Inconel 625 is used where mechanical performance and corrosion resistance are important considerations.
Its resistance to particular environments depends on factors such as temperature, chemical composition of the medium, concentration, flow conditions and exposure duration. The alloy should therefore be selected using application-specific engineering data rather than a general corrosion-resistance claim.
For industrial buyers, this means providing the supplier or materials engineer with details of the operating environment when selecting the grade.
Inconel 625 is used in selected applications involving elevated temperatures. Its performance under such conditions depends on the applied load, exposure duration, atmosphere and required design life.
Mechanical properties at room temperature should not automatically be used for elevated-temperature design calculations. Where temperature is critical, consult appropriate material data and the relevant engineering design code.
The design team should confirm the allowable service conditions before approving the alloy for a specific component.
Chemical composition alone is not enough to establish that a round bar meets the purchase requirement. Buyers should confirm the product specification and verify the supplied material documentation.
ASTM B446 is a commonly referenced specification for nickel-chromium-molybdenum-niobium alloy UNS N06625 bars and rods. Verify the current edition, product scope and specific purchase requirements before specifying it.
During procurement, check the following:
The material test certificate should correspond to the supplied product and the applicable order requirements. Additional testing should be agreed upon before the order is placed.
Inconel 625 is considered for selected marine components that require corrosion resistance and suitable mechanical performance under demanding exposure conditions.
The alloy may be specified for selected equipment and components in chemical-processing environments. Suitability must be established against the actual chemicals, concentrations and operating temperatures.
Inconel 625 is used in certain aerospace applications. Aerospace procurement may require additional material specifications, traceability, approved sourcing and testing documentation.
Round bars can be machined into specialised components where the alloy’s properties suit the application. The component design and operating conditions determine the final material requirements.
Before requesting a quotation, prepare the following details:
For dimensional weight estimates, refer to the Round Bar Weight Chart.
Inconel 625 is a nickel-based alloy containing significant chromium, molybdenum and niobium, along with controlled amounts of other elements. Exact composition limits must be checked against the governing material specification.
The UNS designation for Inconel 625 is N06625.
ASTM B446 is a commonly referenced specification for UNS N06625 bars and rods. Buyers should confirm that it applies to their specific product and purchase requirements.
No. Mechanical properties can vary with product condition and the applicable specification. Verify the supplied material’s test results against the purchase requirements.
Depending on the application and purchase specification, these may include a material test certificate, chemical analysis, mechanical test results, heat-number traceability and inspection reports.
Looking for Inconel 625 round bars (Alloy 625 / UNS N06625) for your industrial or engineering requirements?
Contact Manan Steel & Metals with your required grade, dimensions, quantity and applicable material standard for an availability and quotation review.
Manan Steel & Metals
Send your specifications and documentation requirements with your enquiry to help us review your requirement accurately.